iot/projects/IoTNode/DeviceServices/SerialPort/Controllers/SerialPortController.cs

using IoTNode.DeviceServices.SerialPortManager;
using IoT.Shared.Application.Models;
using Microsoft.AspNetCore.Mvc;
using Swashbuckle.AspNetCore.Annotations;
using System;
using System.ComponentModel.DataAnnotations;

namespace IoTNode.Controllers
{
    [SwaggerTag("串口控制器")]
    public class SerialPortController : BaseDeviceController
    {
        private readonly SerialPortService _deviceService;

        public SerialPortController(IServiceProvider applicationServices, SerialPortService deviceService) : base(applicationServices)
        {
            this._deviceService = deviceService;
        }

        [HttpGet, Route("/[controller]/[action]"), SwaggerOperation("发送指令")]

        public ApiResponse Send([SwaggerParameter("设备编号"), Required] string number, [SwaggerParameter("命令"), Required] string name)
        {
            return this.AsyncAction(() =>
            {
                this._deviceService.SendMessage(number, name);
            });
        }

        [HttpGet, Route("/[controller]/[action]"), SwaggerOperation("自定义指令")]
        public ApiResponse Buttons([SwaggerParameter("设备编号"), Required] string number, [SwaggerParameter("指令"), Required] string buttons)
        {
            return this.AsyncAction(() =>
            {
                this._deviceService.UpdateButtons(number, buttons);
            });
        }

        [HttpGet, Route("/[controller]/[action]"), SwaggerOperation("测试")]
        public ApiResponse Test([SwaggerParameter("设备编号"), Required] string number,
            [SwaggerParameter("串口"), Required] string port,
            [SwaggerParameter("波特率"), Required] int baud,
            [SwaggerParameter("数据位"), Required] int dataBits,
            [SwaggerParameter("校验位"), Required] int partity,
            [SwaggerParameter("停止位"), Required] int stopBits,
            [SwaggerParameter("消息"), Required] string message)
        {
            return this.AsyncAction(() =>
            {
                this._deviceService.ExecCommand(port, baud, dataBits, partity, stopBits, message);
            });
        }
    }
}