diff --git a/projects/Infrastructure/Infrastructure.csproj b/projects/Infrastructure/Infrastructure.csproj
index ec1d4c75..88bee16a 100644
--- a/projects/Infrastructure/Infrastructure.csproj
+++ b/projects/Infrastructure/Infrastructure.csproj
@@ -9,7 +9,7 @@
-
+
all
runtime; build; native; contentfiles; analyzers; buildtransitive
@@ -37,7 +37,7 @@
-
+
聽
diff --git a/projects/IoT.Shared/IoT.Shared.csproj b/projects/IoT.Shared/IoT.Shared.csproj
index f05f9664..38e84aad 100644
--- a/projects/IoT.Shared/IoT.Shared.csproj
+++ b/projects/IoT.Shared/IoT.Shared.csproj
@@ -8,7 +8,7 @@
-
+
all
runtime; build; native; contentfiles; analyzers; buildtransitive
diff --git a/projects/IoTCenter/IoTCenter.csproj b/projects/IoTCenter/IoTCenter.csproj
index 26cd33d5..42e94c43 100644
--- a/projects/IoTCenter/IoTCenter.csproj
+++ b/projects/IoTCenter/IoTCenter.csproj
@@ -4,7 +4,7 @@
true
-
+
all
runtime; build; native; contentfiles; analyzers; buildtransitive
@@ -14,5 +14,9 @@
-
+
+
+
+
+
\ No newline at end of file
diff --git a/projects/IoTKeyGen/IoTKeyGen.csproj b/projects/IoTKeyGen/IoTKeyGen.csproj
index 08c9e820..adda3e26 100644
--- a/projects/IoTKeyGen/IoTKeyGen.csproj
+++ b/projects/IoTKeyGen/IoTKeyGen.csproj
@@ -7,7 +7,7 @@
-
+
all
runtime; build; native; contentfiles; analyzers; buildtransitive
diff --git a/projects/IoTNode/IoTNode.csproj b/projects/IoTNode/IoTNode.csproj
index 49bba8c0..b8a12e53 100644
--- a/projects/IoTNode/IoTNode.csproj
+++ b/projects/IoTNode/IoTNode.csproj
@@ -4,7 +4,7 @@
true
-
+
all
runtime; build; native; contentfiles; analyzers; buildtransitive
diff --git a/projects/UserCenter/UserCenter.csproj b/projects/UserCenter/UserCenter.csproj
index 7ddb6215..67f41461 100644
--- a/projects/UserCenter/UserCenter.csproj
+++ b/projects/UserCenter/UserCenter.csproj
@@ -5,7 +5,7 @@
true
-
+
all
runtime; build; native; contentfiles; analyzers; buildtransitive
@@ -14,7 +14,7 @@
-
+
diff --git a/publish/build.cmd b/publish/build.cmd
index b2f3c797..1f68fbca 100644
--- a/publish/build.cmd
+++ b/publish/build.cmd
@@ -4,15 +4,14 @@ set startime=%time%
rd /q/s "./dist/"
echo d|xcopy "./src" "./dist/" /s /e /y /f
+echo d|xcopy "./src/srs/linux-x64" "./dist/linux-x64/publish/apps" /s /e /y /f
dotnet publish ../projects/UserCenter/UserCenter.csproj -c Release -r linux-x64 -o ../publish/dist/linux-x64/publish/apps/UserCenter
dotnet publish ../projects/IoTCenter/IoTCenter.csproj -c Release -r linux-x64 -o ../publish/dist/linux-x64/publish/apps/IoTCenter
-::dotnet publish ../projects/UserCenter/UserCenter.csproj -c Release -r linux-arm -o ../publish/dist/linux-arm/publish/apps/UserCenter
-dotnet publish ../projects/IoTCenter/IoTCenter.csproj -c Release -r linux-arm -o ../publish/dist/linux-arm/publish/apps/IoTCenter
-dotnet publish ../projects/IoTCenter/IoTCenter.csproj -c Release -r linux-arm64 -o ../publish/dist/linux-arm64/publish/apps/IoTCenter
dotnet publish ../projects/IoTNode/IoTNode.csproj -c Release -r linux-arm -o ../publish/dist/linux-arm/publish/apps/IoTNode
dotnet publish ../projects/IoTNode/IoTNode.csproj -c Release -r linux-arm64 -o ../publish/dist/linux-arm64/publish/apps/IoTNode
+
::dotnet publish ../projects/IoT/IoTServices/WinService/WinService.csproj -c Release -r win-x86 -o "../../publish/dist/win-x86/Program Files (x86)/WinService"
::dotnet publish ../projects/IoT/IoTServices/APService/APService.csproj -c Release -o ../../publish/dist/linux-arm64/publish/apps/APService
::dotnet publish ../projects/IoT/IoTServices/FBeeService/FBeeService.csproj -c Release -r linux-arm64 -o ../publish/dist/linux-arm64/publish/apps/FBeeService
diff --git a/publish/src/linux-arm/publish/files/bellsoft-jdk1.8.0-linux-arm64.deb b/publish/src/linux-arm/publish/files/bellsoft-jdk1.8.0-linux-arm64.deb
deleted file mode 100644
index 22d340cd..00000000
Binary files a/publish/src/linux-arm/publish/files/bellsoft-jdk1.8.0-linux-arm64.deb and /dev/null differ
diff --git a/publish/src/linux-arm/publish/files/dotnet-sdk-3.0.100-linux-arm.tar.gz.REMOVED.git-id b/publish/src/linux-arm/publish/files/dotnet-sdk-3.0.100-linux-arm.tar.gz.REMOVED.git-id
deleted file mode 100644
index eb1fe561..00000000
--- a/publish/src/linux-arm/publish/files/dotnet-sdk-3.0.100-linux-arm.tar.gz.REMOVED.git-id
+++ /dev/null
@@ -1 +0,0 @@
-a4b50539757a420fc15f09f08ce0cad3d39cbc2d
\ No newline at end of file
diff --git a/publish/src/linux-arm/publish/files/fonts-wqy-zenhei_0.9.45-7_all.deb b/publish/src/linux-arm/publish/files/fonts-wqy-zenhei_0.9.45-7_all.deb
deleted file mode 100644
index eb86d062..00000000
Binary files a/publish/src/linux-arm/publish/files/fonts-wqy-zenhei_0.9.45-7_all.deb and /dev/null differ
diff --git a/publish/src/linux-arm/publish/files/n2n_2.5.0-170_armhf.deb b/publish/src/linux-arm/publish/files/n2n_2.5.0-170_armhf.deb
deleted file mode 100644
index 9225565f..00000000
Binary files a/publish/src/linux-arm/publish/files/n2n_2.5.0-170_armhf.deb and /dev/null differ
diff --git a/publish/src/linux-arm/publish/files/openntpd_6.0p1-2_armhf.deb b/publish/src/linux-arm/publish/files/openntpd_6.0p1-2_armhf.deb
deleted file mode 100644
index 5e55b182..00000000
Binary files a/publish/src/linux-arm/publish/files/openntpd_6.0p1-2_armhf.deb and /dev/null differ
diff --git a/publish/src/linux-arm/publish/files/python-meld3_1.0.2-2_all.deb b/publish/src/linux-arm/publish/files/python-meld3_1.0.2-2_all.deb
deleted file mode 100644
index da408e82..00000000
Binary files a/publish/src/linux-arm/publish/files/python-meld3_1.0.2-2_all.deb and /dev/null differ
diff --git a/publish/src/linux-arm/publish/files/supervisor_3.3.5-1_all.deb b/publish/src/linux-arm/publish/files/supervisor_3.3.5-1_all.deb
deleted file mode 100644
index 05b2dd4f..00000000
Binary files a/publish/src/linux-arm/publish/files/supervisor_3.3.5-1_all.deb and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/apps/srs/conf/srs.conf b/publish/src/linux-arm64/publish/apps/srs/conf/srs.conf
deleted file mode 100644
index 687d0ff8..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/conf/srs.conf
+++ /dev/null
@@ -1,36 +0,0 @@
-# main config for srs.
-# @see full.conf for detail config.
-
-listen 1935;
-daemon off;
-max_connections 1000;
-srs_log_tank file;
-srs_log_file ./objs/srs.log;
-http_api {
- enabled on;
- listen 1985;
-}
-http_server {
- enabled on;
- listen 8080;
- dir ./objs/nginx/html;
-}
-stats {
- network 0;
- disk sda sdb xvda xvdb;
-}
-vhost __defaultVhost__ {
- http_remux {
- enabled on;
- mount [vhost]/[app]/[stream].flv;
- hstrs on;
- }
- hls {
- enabled on;
- hls_fragment 3;
- hls_window 10;
- hls_path ./objs/nginx/html;
- hls_m3u8_file [app]/[stream].m3u8;
- hls_ts_file [app]/[stream]-[seq].ts;
- }
-}
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/crossdomain.xml b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/crossdomain.xml
deleted file mode 100644
index ae910848..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/crossdomain.xml
+++ /dev/null
@@ -1,3 +0,0 @@
-
-
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/favicon.ico b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/favicon.ico
deleted file mode 100644
index 62fd6c02..00000000
Binary files a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/favicon.ico and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream.html
deleted file mode 100644
index f910e941..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream.html
+++ /dev/null
@@ -1,3 +0,0 @@
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream_ld.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream_ld.html
deleted file mode 100644
index 22d4dc20..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream_ld.html
+++ /dev/null
@@ -1,3 +0,0 @@
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream_sd.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream_sd.html
deleted file mode 100644
index 54cad593..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/forward/live/livestream_sd.html
+++ /dev/null
@@ -1,3 +0,0 @@
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/index.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/index.html
deleted file mode 100644
index 901ef430..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/index.html
+++ /dev/null
@@ -1,17 +0,0 @@
-
-
-
- SRS
-
-
-
-
-
-
-
-
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/demo.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/demo.html
deleted file mode 100644
index c3ce0245..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/demo.html
+++ /dev/null
@@ -1,3 +0,0 @@
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream.html
deleted file mode 100644
index f910e941..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream.html
+++ /dev/null
@@ -1,3 +0,0 @@
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream_ld.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream_ld.html
deleted file mode 100644
index 22d4dc20..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream_ld.html
+++ /dev/null
@@ -1,3 +0,0 @@
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream_sd.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream_sd.html
deleted file mode 100644
index 54cad593..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/live/livestream_sd.html
+++ /dev/null
@@ -1,3 +0,0 @@
-
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/nginx.html b/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/nginx.html
deleted file mode 100644
index 4f3cdef7..00000000
--- a/publish/src/linux-arm64/publish/apps/srs/objs/nginx/html/nginx.html
+++ /dev/null
@@ -1 +0,0 @@
-Nginx is ok.
diff --git a/publish/src/linux-arm64/publish/apps/srs/objs/srs b/publish/src/linux-arm64/publish/apps/srs/objs/srs
deleted file mode 100644
index a098a6c8..00000000
Binary files a/publish/src/linux-arm64/publish/apps/srs/objs/srs and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/files/bellsoft-jdk1.8.0-linux-arm64.deb b/publish/src/linux-arm64/publish/files/bellsoft-jdk1.8.0-linux-arm64.deb
deleted file mode 100644
index 22d340cd..00000000
Binary files a/publish/src/linux-arm64/publish/files/bellsoft-jdk1.8.0-linux-arm64.deb and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/files/dotnet-sdk-2.2.300-linux-arm.tar.gz b/publish/src/linux-arm64/publish/files/dotnet-sdk-2.2.300-linux-arm.tar.gz
deleted file mode 100644
index 02a9b7e5..00000000
Binary files a/publish/src/linux-arm64/publish/files/dotnet-sdk-2.2.300-linux-arm.tar.gz and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/files/fonts-wqy-zenhei_0.9.45-7_all.deb b/publish/src/linux-arm64/publish/files/fonts-wqy-zenhei_0.9.45-7_all.deb
deleted file mode 100644
index eb86d062..00000000
Binary files a/publish/src/linux-arm64/publish/files/fonts-wqy-zenhei_0.9.45-7_all.deb and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/files/n2n_2.5.0-170_armhf.deb b/publish/src/linux-arm64/publish/files/n2n_2.5.0-170_armhf.deb
deleted file mode 100644
index 9225565f..00000000
Binary files a/publish/src/linux-arm64/publish/files/n2n_2.5.0-170_armhf.deb and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/files/openntpd_6.0p1-2_armhf.deb b/publish/src/linux-arm64/publish/files/openntpd_6.0p1-2_armhf.deb
deleted file mode 100644
index 5e55b182..00000000
Binary files a/publish/src/linux-arm64/publish/files/openntpd_6.0p1-2_armhf.deb and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/files/python-meld3_1.0.2-2_all.deb b/publish/src/linux-arm64/publish/files/python-meld3_1.0.2-2_all.deb
deleted file mode 100644
index da408e82..00000000
Binary files a/publish/src/linux-arm64/publish/files/python-meld3_1.0.2-2_all.deb and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/files/supervisor_3.3.5-1_all.deb b/publish/src/linux-arm64/publish/files/supervisor_3.3.5-1_all.deb
deleted file mode 100644
index 05b2dd4f..00000000
Binary files a/publish/src/linux-arm64/publish/files/supervisor_3.3.5-1_all.deb and /dev/null differ
diff --git a/publish/src/linux-arm64/publish/install.md b/publish/src/linux-arm64/publish/install.md
new file mode 100644
index 00000000..bbfd77ab
--- /dev/null
+++ b/publish/src/linux-arm64/publish/install.md
@@ -0,0 +1,32 @@
+树莓派:ubuntu
+1.下载地址:https://ubuntu.com/download/raspberry-pi
+2.当前镜像:ubuntu-19.10-preinstalled-server-arm64+raspi3.img.xz
+3.默认用户名和密码:ubuntu ubuntu
+4.设置root密码并查看ip
+#sudo passwd root
+#ip addr
+5.ssh登录
+root用户使用putty或win10命令行ssh登录
+6.允许root登录sftp
+#cp /etc/ssh/sshd_config /etc/ssh/sshd_config.bk
+#sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config
+#service ssh restart
+7.上传部署文件
+使用root用户登录sftp上传publish到/root/目录下
+8.配置权限
+#chmod 755 /root/publish/apps/IoTNode/IoTNode
+#chmod 755 /root/publish/apps/IoTNode/wwwroot/ffmpeg-linux-arm64
+9.更换源
+#cp /etc/apt/sources.list /etc/apt/sources.list.bk
+#sed -i 's/ports.ubuntu.com/mirrors.aliyun.com/' /etc/apt/sources.list
+10.更新软件
+#apt update
+#apt upgrade
+11.安装supervisor
+#apt install -y supervisor
+12.配置supervisor
+#cp /etc/supervisor/supervisord.conf /etc/supervisor/supervisord.conf.bk
+#cp -f /root/publish/supervisord.conf /etc/supervisor/supervisord.conf
+13.重启supervisor
+#service supervisor restart
+14.访问
\ No newline at end of file
diff --git a/publish/src/linux-arm64/publish/supervisor/iotnode.conf b/publish/src/linux-arm64/publish/supervisor/iotnode.conf
index 16e20cf8..392163e1 100644
--- a/publish/src/linux-arm64/publish/supervisor/iotnode.conf
+++ b/publish/src/linux-arm64/publish/supervisor/iotnode.conf
@@ -1,6 +1,6 @@
[program:iotnode]
-directory=/home/pi/publish/apps/IoTNode/
-command=/home/pi/publish/apps/IoTNode/IoTNode
+directory=/root/publish/apps/IoTNode/
+command=/root/publish/apps/IoTNode/IoTNode
autostart=true
autorestart=true
-user=pi
\ No newline at end of file
+user=root
\ No newline at end of file
diff --git a/publish/src/linux-arm64/publish/supervisor/njwlservice.conf1 b/publish/src/linux-arm64/publish/supervisor/njwlservice.conf1
deleted file mode 100644
index 7c82e3bd..00000000
--- a/publish/src/linux-arm64/publish/supervisor/njwlservice.conf1
+++ /dev/null
@@ -1,8 +0,0 @@
-[program:njwlservice]
-directory=/home/pi/publish/apps/NJWLService/
-command=bash -C "start.sh"
-autostart=true
-autorestart=true
-stopasgroup=true
-killasgroup=true
-user=pi
\ No newline at end of file
diff --git a/publish/src/linux-arm64/publish/supervisord.conf b/publish/src/linux-arm64/publish/supervisord.conf
index f13e9a28..e6af3252 100644
--- a/publish/src/linux-arm64/publish/supervisord.conf
+++ b/publish/src/linux-arm64/publish/supervisord.conf
@@ -29,4 +29,4 @@ password=pwd
; include files themselves.
[include]
-files = /home/pi/publish/supervisor/*.conf
+files = /root/publish/supervisor/*.conf
diff --git a/publish/src/linux-x64/publish/apps/srs/conf/full.conf b/publish/src/linux-x64/publish/apps/srs/conf/full.conf
deleted file mode 100644
index cf3e0217..00000000
--- a/publish/src/linux-x64/publish/apps/srs/conf/full.conf
+++ /dev/null
@@ -1,1848 +0,0 @@
-# all config for srs
-
-#############################################################################################
-# RTMP sections
-#############################################################################################
-# the rtmp listen ports, split by space, each listen entry is <[ip:]port>
-# for example, 192.168.1.100:1935 10.10.10.100:1935
-# where the ip is optional, default to 0.0.0.0, that is 1935 equals to 0.0.0.0:1935
-listen 1935;
-# the pid file
-# to ensure only one process can use a pid file
-# and provides the current running process id, for script,
-# for example, init.d script to manage the server.
-# default: ./objs/srs.pid
-pid ./objs/srs.pid;
-# the default chunk size is 128, max is 65536,
-# some client does not support chunk size change,
-# however, most clients support it and it can improve
-# performance about 10%.
-# default: 60000
-chunk_size 60000;
-# the logs dir.
-# if enabled ffmpeg, each transcoding stream will create a log file.
-# /dev/null to disable the log.
-# default: ./objs
-ff_log_dir ./objs;
-# the log tank, console or file.
-# if console, print log to console.
-# if file, write log to file. requires srs_log_file if log to file.
-# default: file.
-srs_log_tank file;
-# the log level, for all log tanks.
-# can be: verbose, info, trace, warn, error
-# default: trace
-srs_log_level trace;
-# when srs_log_tank is file, specifies the log file.
-# default: ./objs/srs.log
-srs_log_file ./objs/srs.log;
-# the max connections.
-# if exceed the max connections, server will drop the new connection.
-# default: 1000
-max_connections 1000;
-# whether start as daemon
-# @remark: do not support reload.
-# default: on
-daemon on;
-# whether use utc_time to generate the time struct,
-# if off, use localtime() to generate it,
-# if on, use gmtime() instead, which use UTC time.
-# default: off
-utc_time off;
-# config for the pithy print in ms,
-# which always print constant message specified by interval,
-# whatever the clients in concurrency.
-# default: 10000
-pithy_print_ms 10000;
-
-# the work dir for server, to chdir(work_dir) when not empty or "./"
-# user can config this directory to change the dir.
-# @reamrk do not support reload.
-# default: ./
-work_dir ./;
-# whether quit when parent process changed,
-# used for supervisor mode(not daemon), srs should always quit when
-# supervisor process exited.
-# @remark conflict with daemon, error when both daemon and asprocess are on.
-# @reamrk do not support reload.
-# default: off
-asprocess off;
-
-#############################################################################################
-# heartbeat/stats sections
-#############################################################################################
-# heartbeat to api server
-# @remark, the ip report to server, is retrieve from system stat,
-# which need the config item stats.network.
-heartbeat {
- # whether heartbeat is enabled.
- # default: off
- enabled off;
- # the interval seconds for heartbeat,
- # recommend 0.3,0.6,0.9,1.2,1.5,1.8,2.1,2.4,2.7,3,...,6,9,12,....
- # default: 9.9
- interval 9.3;
- # when startup, srs will heartbeat to this api.
- # @remark: must be a restful http api url, where SRS will POST with following data:
- # {
- # "device_id": "my-srs-device",
- # "ip": "192.168.1.100"
- # }
- # default: http://127.0.0.1:8085/api/v1/servers
- url http://127.0.0.1:8085/api/v1/servers;
- # the id of device.
- device_id "my-srs-device";
- # whether report with summaries
- # if on, put /api/v1/summaries to the request data:
- # {
- # "summaries": summaries object.
- # }
- # @remark: optional config.
- # default: off
- summaries off;
-}
-
-# system statistics section.
-# the main cycle will retrieve the system stat,
-# for example, the cpu/mem/network/disk-io data,
-# the http api, for instance, /api/v1/summaries will show these data.
-# @remark the heartbeat depends on the network,
-# for example, the eth0 maybe the device which index is 0.
-stats {
- # the index of device ip.
- # we may retrieve more than one network device.
- # default: 0
- network 0;
- # the device name to stat the disk iops.
- # ignore the device of /proc/diskstats if not configured.
- disk sda sdb xvda xvdb;
-}
-
-#############################################################################################
-# HTTP sections
-#############################################################################################
-# api of srs.
-# the http api config, export for external program to manage srs.
-# user can access http api of srs in browser directly, for instance, to access by:
-# curl http://192.168.1.170:1985/api/v1/reload
-# which will reload srs, like cmd killall -1 srs, but the js can also invoke the http api,
-# where the cli can only be used in shell/terminate.
-http_api {
- # whether http api is enabled.
- # default: off
- enabled on;
- # the http api listen entry is <[ip:]port>
- # for example, 192.168.1.100:1985
- # where the ip is optional, default to 0.0.0.0, that is 1985 equals to 0.0.0.0:1985
- # default: 1985
- listen 1985;
- # whether enable crossdomain request.
- # default: on
- crossdomain on;
- # the HTTP RAW API is more powerful api to change srs state and reload.
- raw_api {
- # whether enable the HTTP RAW API.
- # default: off
- enabled off;
- # whether enable rpc reload.
- # default: off
- allow_reload off;
- # whether enable rpc query.
- # default: off
- allow_query off;
- # whether enable rpc update.
- # default: off
- allow_update off;
- }
-}
-# embedded http server in srs.
-# the http streaming config, for HLS/HDS/DASH/HTTPProgressive
-# global config for http streaming, user must config the http section for each vhost.
-# the embed http server used to substitute nginx in ./objs/nginx,
-# for example, srs running in arm, can provides RTMP and HTTP service, only with srs installed.
-# user can access the http server pages, generally:
-# curl http://192.168.1.170:80/srs.html
-# which will show srs version and welcome to srs.
-# @remark, the http embedded stream need to config the vhost, for instance, the __defaultVhost__
-# need to open the feature http of vhost.
-http_server {
- # whether http streaming service is enabled.
- # default: off
- enabled on;
- # the http streaming listen entry is <[ip:]port>
- # for example, 192.168.1.100:8080
- # where the ip is optional, default to 0.0.0.0, that is 8080 equals to 0.0.0.0:8080
- # @remark, if use lower port, for instance 80, user must start srs by root.
- # default: 8080
- listen 8080;
- # the default dir for http root.
- # default: ./objs/nginx/html
- dir ./objs/nginx/html;
- # whether enable crossdomain request.
- # for both http static and stream server and apply on all vhosts.
- # default: on
- crossdomain on;
-}
-
-#############################################################################################
-# Streamer sections
-#############################################################################################
-# the streamer cast stream from other protocol to SRS over RTMP.
-# @see https://github.com/ossrs/srs/tree/develop#stream-architecture
-stream_caster {
- # whether stream caster is enabled.
- # default: off
- enabled off;
- # the caster type of stream, the casters:
- # mpegts_over_udp, MPEG-TS over UDP caster.
- # rtsp, Real Time Streaming Protocol (RTSP).
- # flv, FLV over HTTP POST.
- caster mpegts_over_udp;
- # the output rtmp url.
- # for mpegts_over_udp caster, the typically output url:
- # rtmp://127.0.0.1/live/livestream
- # for rtsp caster, the typically output url:
- # rtmp://127.0.0.1/[app]/[stream]
- # for example, the rtsp url:
- # rtsp://192.168.1.173:8544/live/livestream.sdp
- # where the [app] is "live" and [stream] is "livestream", output is:
- # rtmp://127.0.0.1/live/livestream
- # for flv caster, the typically output url:
- # rtmp://127.0.0.1/[app]/[stream]
- # for example, POST to url:
- # http://127.0.0.1:8936/live/livestream.flv
- # where the [app] is "live" and [stream] is "livestream", output is:
- # rtmp://127.0.0.1/live/livestream
- output rtmp://127.0.0.1/live/livestream;
- # the listen port for stream caster.
- # for mpegts_over_udp caster, listen at udp port. for example, 8935.
- # for rtsp caster, listen at tcp port. for example, 554.
- # for flv caster, listen at tcp port. for example, 8936.
- # TODO: support listen at <[ip:]port>
- listen 8935;
- # for the rtsp caster, the rtp server local port over udp,
- # which reply the rtsp setup request message, the port will be used:
- # [rtp_port_min, rtp_port_max)
- rtp_port_min 57200;
- rtp_port_max 57300;
-}
-stream_caster {
- enabled off;
- caster mpegts_over_udp;
- output rtmp://127.0.0.1/live/livestream;
- listen 8935;
-}
-stream_caster {
- enabled off;
- caster rtsp;
- output rtmp://127.0.0.1/[app]/[stream];
- listen 554;
- rtp_port_min 57200;
- rtp_port_max 57300;
-}
-stream_caster {
- enabled off;
- caster flv;
- output rtmp://127.0.0.1/[app]/[stream];
- listen 8936;
-}
-
-#############################################################################################
-# Kafka sections
-#############################################################################################
-# Apache Kafka is a high-throughput distributed messaging system.
-# SRS is a Kafka producer to send message to kafka.
-# @see https://kafka.apache.org/documentation.html#introduction
-kafka {
- # whether enabled kafka.
- # default: off
- enabled off;
- # the broker list, broker is
- # and use space to specify multple brokers.
- # for example, 127.0.0.1:9092 127.0.0.1:9093
- brokers 127.0.0.1:9092;
- # the kafka topic to use.
- # default: srs
- topic srs;
-}
-
-#############################################################################################
-# RTMP/HTTP VHOST sections
-#############################################################################################
-# vhost list, the __defaultVhost__ is the default vhost
-# for example, user use ip to access the stream: rtmp://192.168.1.2/live/livestream.
-# for which cannot identify the required vhost.
-vhost __defaultVhost__ {
-}
-
-# the vhost scope configs.
-vhost scope.vhost.srs.com {
- # whether the vhost is enabled.
- # if off, all request access denied.
- # default: on
- enabled off;
-
- # whether enable min delay mode for vhost.
- # for min latency mode:
- # 1. disable the publish.mr for vhost.
- # 2. use timeout for cond wait for consumer queue.
- # @see https://github.com/ossrs/srs/issues/257
- # default: off
- min_latency off;
-
- # whether enable the TCP_NODELAY
- # if on, set the nodelay of fd by setsockopt
- # default: off
- tcp_nodelay off;
-
- # the default chunk size is 128, max is 65536,
- # some client does not support chunk size change,
- # vhost chunk size will override the global value.
- # default: global chunk size.
- chunk_size 128;
-
- # The input ack size, 0 to not set.
- # Generally, it's set by the message from peer,
- # but for some peer(encoder), it never send message but use a different ack size.
- # We can chnage the default ack size in server-side, to send acknowledge message,
- # or the encoder maybe blocked after publishing for some time.
- # Default: 0
- in_ack_size 0;
-
- # The output ack size, 0 to not set.
- # This is used to notify the peer(player) to send acknowledge to server.
- # Default: 2500000
- out_ack_size 2500000;
-}
-
-# set the chunk size of vhost.
-vhost chunksize.srs.com {
- # @see scope.vhost.srs.com
- chunk_size 128;
-}
-
-# the vhost disabled.
-vhost removed.srs.com {
- # @see scope.vhost.srs.com
- enabled off;
-}
-
-# vhost for stream cluster for RTMP/FLV
-vhost cluster.srs.com {
- # The config for cluster.
- cluster {
- # The cluster mode, local or remote.
- # local: It's an origin server, serve streams itself.
- # remote: It's an edge server, fetch or push stream to origin server.
- # default: local
- mode remote;
-
- # For edge(mode remote), user must specifies the origin server
- # format as: [:port]
- # @remark user can specifies multiple origin for error backup, by space,
- # for example, 192.168.1.100:1935 192.168.1.101:1935 192.168.1.102:1935
- origin 127.0.0.1:1935 localhost:1935;
-
- # For edge(mode remote), whether open the token traverse mode,
- # if token traverse on, all connections of edge will forward to origin to check(auth),
- # it's very important for the edge to do the token auth.
- # the better way is use http callback to do the token auth by the edge,
- # but if user prefer origin check(auth), the token_traverse if better solution.
- # default: off
- token_traverse off;
-
- # For edge(mode remote), the vhost to transform for edge,
- # to fetch from the specified vhost at origin,
- # if not specified, use the current vhost of edge in origin, the variable [vhost].
- # default: [vhost]
- vhost same.edge.srs.com;
-
- # For edge(mode remote), when upnode(forward to, edge push to, edge pull from) is srs,
- # it's strongly recommend to open the debug_srs_upnode,
- # when connect to upnode, it will take the debug info,
- # for example, the id, source id, pid.
- # please see: https://github.com/ossrs/srs/wiki/v1_CN_SrsLog
- # default: on
- debug_srs_upnode on;
-
- # For origin(mode local) cluster, turn on the cluster.
- # @remark Origin cluster only supports RTMP, use Edge to transmux RTMP to FLV.
- # default: off
- # TODO: FIXME: Support reload.
- origin_cluster off;
-
- # For origin (mode local) cluster, the co-worker's HTTP APIs.
- # This origin will connect to co-workers and communicate with them.
- # please read: https://github.com/ossrs/srs/wiki/v3_EN_OriginCluster
- # TODO: FIXME: Support reload.
- coworkers 127.0.0.1:9091 127.0.0.1:9092;
- }
-}
-
-# vhost for edge, edge and origin is the same vhost
-vhost same.edge.srs.com {
- # @see cluster.srs.com
- cluster {
- mode remote;
- origin 127.0.0.1:1935 localhost:1935;
- token_traverse off;
- }
-}
-
-# vhost for edge, edge transform vhost to fetch from another vhost.
-vhost transform.edge.srs.com {
- # @see cluster.srs.com
- cluster {
- mode remote;
- origin 127.0.0.1:1935;
- vhost same.edge.srs.com;
- }
-}
-
-# the vhost for srs debug info, whether send args in connect(tcUrl).
-vhost debug.srs.com {
- # @see cluster.srs.com
- cluster {
- debug_srs_upnode on;
- }
-}
-
-# the vhost which forward publish streams.
-vhost same.vhost.forward.srs.com {
- # forward stream to other servers.
- forward {
- # whether enable the forward.
- # default: off
- enabled on;
- # forward all publish stream to the specified server.
- # this used to split/forward the current stream for cluster active-standby,
- # active-active for cdn to build high available fault tolerance system.
- # format: {ip}:{port} {ip_N}:{port_N}
- destination 127.0.0.1:1936 127.0.0.1:1937;
- }
-}
-
-# the play specified configs
-vhost play.srs.com {
- # for play client, both RTMP and other stream clients,
- # for instance, the HTTP FLV stream clients.
- play {
- # whether cache the last gop.
- # if on, cache the last gop and dispatch to client,
- # to enabled fast startup for client, client play immediately.
- # if off, send the latest media data to client,
- # client need to wait for the next Iframe to decode and show the video.
- # set to off if requires min delay;
- # set to on if requires client fast startup.
- # default: on
- gop_cache off;
- # the max live queue length in seconds.
- # if the messages in the queue exceed the max length,
- # drop the old whole gop.
- # default: 30
- queue_length 10;
-
- # about the stream monotonically increasing:
- # 1. video timestamp is monotonically increasing,
- # 2. audio timestamp is monotonically increasing,
- # 3. video and audio timestamp is interleaved/mixed monotonically increasing.
- # it's specified by RTMP specification, @see 3. Byte Order, Alignment, and Time Format
- # however, some encoder cannot provides this feature, please set this to off to ignore time jitter.
- # the time jitter algorithm:
- # 1. full, to ensure stream start at zero, and ensure stream monotonically increasing.
- # 2. zero, only ensure stream start at zero, ignore timestamp jitter.
- # 3. off, disable the time jitter algorithm, like atc.
- # @remark for full, correct timestamp only when |delta| > 250ms.
- # @remark disabled when atc is on.
- # default: full
- time_jitter full;
- # vhost for atc for hls/hds/rtmp backup.
- # generally, atc default to off, server delivery rtmp stream to client(flash) timestamp from 0.
- # when atc is on, server delivery rtmp stream by absolute time.
- # atc is used, for instance, encoder will copy stream to master and slave server,
- # server use atc to delivery stream to edge/client, where stream time from master/slave server
- # is always the same, client/tools can slice RTMP stream to HLS according to the same time,
- # if the time not the same, the HLS stream cannot slice to support system backup.
- #
- # @see http://www.adobe.com/cn/devnet/adobe-media-server/articles/varnish-sample-for-failover.html
- # @see http://www.baidu.com/#wd=hds%20hls%20atc
- #
- # @remark when atc is on, auto off the time_jitter
- # default: off
- atc off;
- # whether use the interleaved/mixed algorithm to correct the timestamp.
- # if on, always ensure the timestamp of audio+video is interleaved/mixed monotonically increase.
- # if off, use time_jitter to correct the timestamp if required.
- # @remark to use mix_correct, atc should on(or time_jitter should off).
- # default: off
- mix_correct off;
-
- # whether enable the auto atc,
- # if enabled, detect the bravo_atc="true" in onMetaData packet,
- # set atc to on if matched.
- # always ignore the onMetaData if atc_auto is off.
- # default: off
- atc_auto off;
-
- # set the MW(merged-write) latency in ms.
- # SRS always set mw on, so we just set the latency value.
- # the latency of stream >= mw_latency + mr_latency
- # the value recomment is [300, 1800]
- # default: 350
- mw_latency 350;
-
- # the minimal packets send interval in ms,
- # used to control the ndiff of stream by srs_rtmp_dump,
- # for example, some device can only accept some stream which
- # delivery packets in constant interval(not cbr).
- # @remark 0 to disable the minimal interval.
- # @remark >0 to make the srs to send message one by one.
- # @remark user can get the right packets interval in ms by srs_rtmp_dump.
- # default: 0
- send_min_interval 10.0;
- # whether reduce the sequence header,
- # for some client which cannot got duplicated sequence header,
- # while the sequence header is not changed yet.
- # default: off
- reduce_sequence_header on;
- }
-}
-
-# vhost for time jitter
-vhost jitter.srs.com {
- # @see play.srs.com
- # to use time_jitter full, the default config.
- play {
- }
- # to use mix_correct.
- play {
- time_jitter off;
- mix_correct on;
- }
- play {
- atc on;
- mix_correct on;
- }
- # to use atc
- play {
- atc on;
- }
-}
-
-# vhost for atc.
-vhost atc.srs.com {
- # @see play.srs.com
- play {
- atc on;
- atc_auto on;
- }
-}
-
-# the MR(merged-read) setting for publisher.
-# the MW(merged-write) settings for player.
-vhost mrw.srs.com {
- # @see scope.vhost.srs.com
- min_latency off;
-
- # @see play.srs.com
- play {
- mw_latency 350;
- }
-
- # @see publish.srs.com
- publish {
- mr on;
- mr_latency 350;
- }
-}
-
-# the vhost for min delay, do not cache any stream.
-vhost min.delay.com {
- # @see scope.vhost.srs.com
- min_latency on;
- # @see scope.vhost.srs.com
- tcp_nodelay on;
-
- # @see play.srs.com
- play {
- mw_latency 100;
- gop_cache off;
- queue_length 10;
- }
-
- # @see publish.srs.com
- publish {
- mr off;
- }
-}
-
-# whether disable the sps parse, for the resolution of video.
-vhost no.parse.sps.com {
- # @see publish.srs.com
- publish {
- parse_sps on;
- }
-}
-
-# the vhost to control the stream delivery feature
-vhost stream.control.com {
- # @see scope.vhost.srs.com
- min_latency on;
- # @see scope.vhost.srs.com
- tcp_nodelay on;
-
- # @see play.srs.com
- play {
- mw_latency 100;
- queue_length 10;
- send_min_interval 10.0;
- reduce_sequence_header on;
- }
-
- # @see publish.srs.com
- publish {
- mr off;
- firstpkt_timeout 20000;
- normal_timeout 7000;
- }
-}
-
-# the publish specified configs
-vhost publish.srs.com {
- # the config for FMLE/Flash publisher, which push RTMP to SRS.
- publish {
- # about MR, read https://github.com/ossrs/srs/issues/241
- # when enabled the mr, SRS will read as large as possible.
- # default: off
- mr off;
- # the latency in ms for MR(merged-read),
- # the performance+ when latency+, and memory+,
- # memory(buffer) = latency * kbps / 8
- # for example, latency=500ms, kbps=3000kbps, each publish connection will consume
- # memory = 500 * 3000 / 8 = 187500B = 183KB
- # when there are 2500 publisher, the total memory of SRS at least:
- # 183KB * 2500 = 446MB
- # the recommended value is [300, 2000]
- # default: 350
- mr_latency 350;
-
- # the 1st packet timeout in ms for encoder.
- # default: 20000
- firstpkt_timeout 20000;
- # the normal packet timeout in ms for encoder.
- # default: 5000
- normal_timeout 7000;
- # whether parse the sps when publish stream.
- # we can got the resolution of video for stat api.
- # but we may failed to cause publish failed.
- # default: on
- parse_sps on;
- }
-}
-
-# the vhost for anti-suck.
-vhost refer.anti_suck.com {
- # refer hotlink-denial.
- refer {
- # whether enable the refer hotlink-denial.
- # default: off.
- enabled on;
- # the common refer for play and publish.
- # if the page url of client not in the refer, access denied.
- # if not specified this field, allow all.
- # default: not specified.
- all github.com github.io;
- # refer for publish clients specified.
- # the common refer is not overridden by this.
- # if not specified this field, allow all.
- # default: not specified.
- publish github.com github.io;
- # refer for play clients specified.
- # the common refer is not overridden by this.
- # if not specified this field, allow all.
- # default: not specified.
- play github.com github.io;
- }
-}
-
-# vhost for bandwidth check
-# generally, the bandcheck vhost must be: bandcheck.srs.com,
-# or need to modify the vhost of client.
-vhost bandcheck.srs.com {
- enabled on;
- chunk_size 65000;
- # bandwidth check config.
- bandcheck {
- # whether support bandwidth check,
- # default: off.
- enabled on;
- # the key for server to valid,
- # if invalid key, server disconnect and abort the bandwidth check.
- key "35c9b402c12a7246868752e2878f7e0e";
- # the interval in seconds for bandwidth check,
- # server do not allow new test request.
- # default: 30
- interval 30;
- # the max available check bandwidth in kbps.
- # to avoid attack of bandwidth check.
- # default: 1000
- limit_kbps 4000;
- }
-}
-
-# the security to allow or deny clients.
-vhost security.srs.com {
- # security for host to allow or deny clients.
- # @see https://github.com/ossrs/srs/issues/211
- security {
- # whether enable the security for vhost.
- # default: off
- enabled on;
- # the security list, each item format as:
- # allow|deny publish|play all|
- # for example:
- # allow publish all;
- # deny publish all;
- # allow publish 127.0.0.1;
- # deny publish 127.0.0.1;
- # allow play all;
- # deny play all;
- # allow play 127.0.0.1;
- # deny play 127.0.0.1;
- # SRS apply the following simple strategies one by one:
- # 1. allow all if security disabled.
- # 2. default to deny all when security enabled.
- # 3. allow if matches allow strategy.
- # 4. deny if matches deny strategy.
- allow play all;
- allow publish all;
- }
-}
-
-# vhost for http static and flv vod stream for each vhost.
-vhost http.static.srs.com {
- # http static vhost specified config
- http_static {
- # whether enabled the http static service for vhost.
- # default: off
- enabled on;
- # the url to mount to,
- # typical mount to [vhost]/
- # the variables:
- # [vhost] current vhost for http server.
- # @remark the [vhost] is optional, used to mount at specified vhost.
- # @remark the http of __defaultVhost__ will override the http_server section.
- # for example:
- # mount to [vhost]/
- # access by http://ossrs.net:8080/xxx.html
- # mount to [vhost]/hls
- # access by http://ossrs.net:8080/hls/xxx.html
- # mount to /
- # access by http://ossrs.net:8080/xxx.html
- # or by http://192.168.1.173:8080/xxx.html
- # mount to /hls
- # access by http://ossrs.net:8080/hls/xxx.html
- # or by http://192.168.1.173:8080/hls/xxx.html
- # @remark the port of http is specified by http_server section.
- # default: [vhost]/
- mount [vhost]/hls;
- # main dir of vhost,
- # to delivery HTTP stream of this vhost.
- # default: ./objs/nginx/html
- dir ./objs/nginx/html/hls;
- }
-}
-
-# vhost for http flv/aac/mp3 live stream for each vhost.
-vhost http.remux.srs.com {
- # http flv/mp3/aac/ts stream vhost specified config
- http_remux {
- # whether enable the http live streaming service for vhost.
- # default: off
- enabled on;
- # the fast cache for audio stream(mp3/aac),
- # to cache more audio and send to client in a time to make android(weixin) happy.
- # @remark the flv/ts stream ignore it
- # @remark 0 to disable fast cache for http audio stream.
- # default: 0
- fast_cache 30;
- # the stream mount for rtmp to remux to live streaming.
- # typical mount to [vhost]/[app]/[stream].flv
- # the variables:
- # [vhost] current vhost for http live stream.
- # [app] current app for http live stream.
- # [stream] current stream for http live stream.
- # @remark the [vhost] is optional, used to mount at specified vhost.
- # the extension:
- # .flv mount http live flv stream, use default gop cache.
- # .ts mount http live ts stream, use default gop cache.
- # .mp3 mount http live mp3 stream, ignore video and audio mp3 codec required.
- # .aac mount http live aac stream, ignore video and audio aac codec required.
- # for example:
- # mount to [vhost]/[app]/[stream].flv
- # access by http://ossrs.net:8080/live/livestream.flv
- # mount to /[app]/[stream].flv
- # access by http://ossrs.net:8080/live/livestream.flv
- # or by http://192.168.1.173:8080/live/livestream.flv
- # mount to [vhost]/[app]/[stream].mp3
- # access by http://ossrs.net:8080/live/livestream.mp3
- # mount to [vhost]/[app]/[stream].aac
- # access by http://ossrs.net:8080/live/livestream.aac
- # mount to [vhost]/[app]/[stream].ts
- # access by http://ossrs.net:8080/live/livestream.ts
- # @remark the port of http is specified by http_server section.
- # default: [vhost]/[app]/[stream].flv
- mount [vhost]/[app]/[stream].flv;
- }
-}
-
-# the http hook callback vhost, srs will invoke the hooks for specified events.
-vhost hooks.callback.srs.com {
- http_hooks {
- # whether the http hooks enable.
- # default off.
- enabled on;
- # when client connect to vhost/app, call the hook,
- # the request in the POST data string is a object encode by json:
- # {
- # "action": "on_connect",
- # "client_id": 1985,
- # "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
- # "tcUrl": "rtmp://video.test.com/live?key=d2fa801d08e3f90ed1e1670e6e52651a",
- # "pageUrl": "http://www.test.com/live.html"
- # }
- # if valid, the hook must return HTTP code 200(Status OK) and response
- # an int value specifies the error code(0 corresponding to success):
- # 0
- # support multiple api hooks, format:
- # on_connect http://xxx/api0 http://xxx/api1 http://xxx/apiN
- on_connect http://127.0.0.1:8085/api/v1/clients http://localhost:8085/api/v1/clients;
- # when client close/disconnect to vhost/app/stream, call the hook,
- # the request in the POST data string is a object encode by json:
- # {
- # "action": "on_close",
- # "client_id": 1985,
- # "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
- # "send_bytes": 10240, "recv_bytes": 10240
- # }
- # if valid, the hook must return HTTP code 200(Status OK) and response
- # an int value specifies the error code(0 corresponding to success):
- # 0
- # support multiple api hooks, format:
- # on_close http://xxx/api0 http://xxx/api1 http://xxx/apiN
- on_close http://127.0.0.1:8085/api/v1/clients http://localhost:8085/api/v1/clients;
- # when client(encoder) publish to vhost/app/stream, call the hook,
- # the request in the POST data string is a object encode by json:
- # {
- # "action": "on_publish",
- # "client_id": 1985,
- # "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
- # "stream": "livestream", "param":"?token=xxx&salt=yyy"
- # }
- # if valid, the hook must return HTTP code 200(Status OK) and response
- # an int value specifies the error code(0 corresponding to success):
- # 0
- # support multiple api hooks, format:
- # on_publish http://xxx/api0 http://xxx/api1 http://xxx/apiN
- on_publish http://127.0.0.1:8085/api/v1/streams http://localhost:8085/api/v1/streams;
- # when client(encoder) stop publish to vhost/app/stream, call the hook,
- # the request in the POST data string is a object encode by json:
- # {
- # "action": "on_unpublish",
- # "client_id": 1985,
- # "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
- # "stream": "livestream", "param":"?token=xxx&salt=yyy"
- # }
- # if valid, the hook must return HTTP code 200(Status OK) and response
- # an int value specifies the error code(0 corresponding to success):
- # 0
- # support multiple api hooks, format:
- # on_unpublish http://xxx/api0 http://xxx/api1 http://xxx/apiN
- on_unpublish http://127.0.0.1:8085/api/v1/streams http://localhost:8085/api/v1/streams;
- # when client start to play vhost/app/stream, call the hook,
- # the request in the POST data string is a object encode by json:
- # {
- # "action": "on_play",
- # "client_id": 1985,
- # "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
- # "stream": "livestream", "param":"?token=xxx&salt=yyy",
- # "pageUrl": "http://www.test.com/live.html"
- # }
- # if valid, the hook must return HTTP code 200(Status OK) and response
- # an int value specifies the error code(0 corresponding to success):
- # 0
- # support multiple api hooks, format:
- # on_play http://xxx/api0 http://xxx/api1 http://xxx/apiN
- on_play http://127.0.0.1:8085/api/v1/sessions http://localhost:8085/api/v1/sessions;
- # when client stop to play vhost/app/stream, call the hook,
- # the request in the POST data string is a object encode by json:
- # {
- # "action": "on_stop",
- # "client_id": 1985,
- # "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
- # "stream": "livestream", "param":"?token=xxx&salt=yyy"
- # }
- # if valid, the hook must return HTTP code 200(Status OK) and response
- # an int value specifies the error code(0 corresponding to success):
- # 0
- # support multiple api hooks, format:
- # on_stop http://xxx/api0 http://xxx/api1 http://xxx/apiN
- on_stop http://127.0.0.1:8085/api/v1/sessions http://localhost:8085/api/v1/sessions;
- # when srs reap a dvr file, call the hook,
- # the request in the POST data string is a object encode by json:
- # {
- # "action": "on_dvr",
- # "client_id": 1985,
- # "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
- # "stream": "livestream", "param":"?token=xxx&salt=yyy",
- # "cwd": "/usr/local/srs",
- # "file": "./objs/nginx/html/live/livestream.1420254068776.flv"
- # }
- # if valid, the hook must return HTTP code 200(Status OK) and response
- # an int value specifies the error code(0 corresponding to success):
- # 0
- on_dvr http://127.0.0.1:8085/api/v1/dvrs http://localhost:8085/api/v1/dvrs;
- # when srs reap a ts file of hls, call the hook,
- # the request in the POST data string is a object encode by json:
- # {
- # "action": "on_hls",
- # "client_id": 1985,
- # "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
- # "stream": "livestream", "param":"?token=xxx&salt=yyy",
- # "duration": 9.36, // in seconds
- # "cwd": "/usr/local/srs",
- # "file": "./objs/nginx/html/live/livestream/2015-04-23/01/476584165.ts",
- # "url": "live/livestream/2015-04-23/01/476584165.ts",
- # "m3u8": "./objs/nginx/html/live/livestream/live.m3u8",
- # "m3u8_url": "live/livestream/live.m3u8",
- # "seq_no": 100
- # }
- # if valid, the hook must return HTTP code 200(Status OK) and response
- # an int value specifies the error code(0 corresponding to success):
- # 0
- on_hls http://127.0.0.1:8085/api/v1/hls http://localhost:8085/api/v1/hls;
- # when srs reap a ts file of hls, call this hook,
- # used to push file to cdn network, by get the ts file from cdn network.
- # so we use HTTP GET and use the variable following:
- # [app], replace with the app.
- # [stream], replace with the stream.
- # [param], replace with the param.
- # [ts_url], replace with the ts url.
- # ignore any return data of server.
- # @remark random select a url to report, not report all.
- on_hls_notify http://127.0.0.1:8085/api/v1/hls/[app]/[stream]/[ts_url][param];
- }
-}
-
-# the vhost for exec, fork process when publish stream.
-vhost exec.srs.com {
- # the exec used to fork process when got some event.
- exec {
- # whether enable the exec.
- # default: off.
- enabled off;
- # when publish stream, exec the process with variables:
- # [vhost] the input stream vhost.
- # [port] the input stream port.
- # [app] the input stream app.
- # [stream] the input stream name.
- # [engine] the transcode engine name.
- # other variables for exec only:
- # [url] the rtmp url which trigger the publish.
- # [tcUrl] the client request tcUrl.
- # [swfUrl] the client request swfUrl.
- # [pageUrl] the client request pageUrl.
- # @remark empty to ignore this exec.
- publish ./objs/ffmpeg/bin/ffmpeg -f flv -i [url] -c copy -y ./[stream].flv;
- }
-}
-
-# The vhost for MPEG-DASH.
-vhost dash.srs.com {
- dash {
- # Whether DASH is enabled.
- # Transmux RTMP to DASH if on.
- # Default: off
- enabled on;
- # The duration of segment in seconds.
- # Default: 3
- dash_fragment 3;
- # The period to update the MPD in seconds.
- # Default: 30
- dash_update_period 30;
- # The depth of timeshift buffer in seconds.
- # Default: 60
- dash_timeshift 60;
- # The base/home dir/path for dash.
- # All init and segment files will write under this dir.
- dash_path ./objs/nginx/html;
- # The DASH MPD file path.
- # We supports some variables to generate the filename.
- # [vhost], the vhost of stream.
- # [app], the app of stream.
- # [stream], the stream name of stream.
- # Default: [app]/[stream].mpd
- dash_mpd_file [app]/[stream].mpd;
- }
-}
-
-# the vhost with hls specified.
-vhost hls.srs.com {
- hls {
- # whether the hls is enabled.
- # if off, do not write hls(ts and m3u8) when publish.
- # default: off
- enabled on;
- # the hls fragment in seconds, the duration of a piece of ts.
- # default: 10
- hls_fragment 10;
- # the hls m3u8 target duration ratio,
- # EXT-X-TARGETDURATION = hls_td_ratio * hls_fragment // init
- # EXT-X-TARGETDURATION = max(ts_duration, EXT-X-TARGETDURATION) // for each ts
- # @see https://github.com/ossrs/srs/issues/304#issuecomment-74000081
- # default: 1.5
- hls_td_ratio 1.5;
- # the audio overflow ratio.
- # for pure audio, the duration to reap the segment.
- # for example, the hls_fragment is 10s, hls_aof_ratio is 2.0,
- # the segment will reap to 20s for pure audio.
- # default: 2.0
- hls_aof_ratio 2.0;
- # the hls window in seconds, the number of ts in m3u8.
- # default: 60
- hls_window 60;
- # the error strategy. can be:
- # ignore, disable the hls.
- # disconnect, require encoder republish.
- # continue, ignore failed try to continue output hls.
- # @see https://github.com/ossrs/srs/issues/264
- # default: continue
- hls_on_error continue;
- # the hls output path.
- # the m3u8 file is configured by hls_path/hls_m3u8_file, the default is:
- # ./objs/nginx/html/[app]/[stream].m3u8
- # the ts file is configured by hls_path/hls_ts_file, the default is:
- # ./objs/nginx/html/[app]/[stream]-[seq].ts
- # @remark the hls_path is compatible with srs v1 config.
- # default: ./objs/nginx/html
- hls_path ./objs/nginx/html;
- # the hls m3u8 file name.
- # we supports some variables to generate the filename.
- # [vhost], the vhost of stream.
- # [app], the app of stream.
- # [stream], the stream name of stream.
- # default: [app]/[stream].m3u8
- hls_m3u8_file [app]/[stream].m3u8;
- # the hls ts file name.
- # we supports some variables to generate the filename.
- # [vhost], the vhost of stream.
- # [app], the app of stream.
- # [stream], the stream name of stream.
- # [2006], replace this const to current year.
- # [01], replace this const to current month.
- # [02], replace this const to current date.
- # [15], replace this const to current hour.
- # [04], replace this const to current minute.
- # [05], replace this const to current second.
- # [999], replace this const to current millisecond.
- # [timestamp],replace this const to current UNIX timestamp in ms.
- # [seq], the sequence number of ts.
- # [duration], replace this const to current ts duration.
- # @see https://github.com/ossrs/srs/wiki/v2_CN_DVR#custom-path
- # @see https://github.com/ossrs/srs/wiki/v2_CN_DeliveryHLS#hls-config
- # default: [app]/[stream]-[seq].ts
- hls_ts_file [app]/[stream]-[seq].ts;
- # whether use floor for the hls_ts_file path generation.
- # if on, use floor(timestamp/hls_fragment) as the variable [timestamp],
- # and use enhanced algorithm to calc deviation for segment.
- # @remark when floor on, recommend the hls_segment>=2*gop.
- # default: off
- hls_ts_floor off;
- # the hls entry prefix, which is base url of ts url.
- # for example, the prefix is:
- # http://your-server/
- # then, the ts path in m3u8 will be like:
- # http://your-server/live/livestream-0.ts
- # http://your-server/live/livestream-1.ts
- # ...
- # optional, default to empty string.
- hls_entry_prefix http://your-server;
- # the default audio codec of hls.
- # when codec changed, write the PAT/PMT table, but maybe ok util next ts.
- # so user can set the default codec for mp3.
- # the available audio codec:
- # aac, mp3, an
- # default: aac
- hls_acodec aac;
- # the default video codec of hls.
- # when codec changed, write the PAT/PMT table, but maybe ok util next ts.
- # so user can set the default codec for pure audio(without video) to vn.
- # the available video codec:
- # h264, vn
- # default: h264
- hls_vcodec h264;
- # whether cleanup the old expired ts files.
- # default: on
- hls_cleanup on;
- # the timeout in seconds to dispose the hls,
- # dispose is to remove all hls files, m3u8 and ts files.
- # when publisher timeout dispose hls.
- # @remark 0 to disable dispose for publisher.
- # @remark apply for publisher timeout only, while "etc/init.d/srs stop" always dispose hls.
- # default: 0
- hls_dispose 0;
- # the max size to notify hls,
- # to read max bytes from ts of specified cdn network,
- # @remark only used when on_hls_notify is config.
- # default: 64
- hls_nb_notify 64;
- # whether wait keyframe to reap segment,
- # if off, reap segment when duration exceed the fragment,
- # if on, reap segment when duration exceed and got keyframe.
- # default: on
- hls_wait_keyframe on;
-
- # whether using AES encryption.
- # default: off
- hls_keys on;
- # the number of clear ts which one key can encrypt.
- # default: 5
- hls_fragments_per_key 5;
- # the hls key file name.
- # we supports some variables to generate the filename.
- # [vhost], the vhost of stream.
- # [app], the app of stream.
- # [stream], the stream name of stream.
- # [seq], the sequence number of key corresponding to the ts.
- hls_key_file [app]/[stream]-[seq].key;
- # the key output path.
- # the key file is configed by hls_path/hls_key_file, the default is:
- # ./objs/nginx/html/[app]/[stream]-[seq].key
- hls_key_file_path ./objs/nginx/html;
- # the key root URL, use this can support https.
- # @remark It's optional.
- hls_key_url https://localhost:8080;
-
- # on_hls, never config in here, should config in http_hooks.
- # for the hls http callback, @see http_hooks.on_hls of vhost hooks.callback.srs.com
- # @read https://github.com/ossrs/srs/wiki/v2_CN_DeliveryHLS#http-callback
- # @read https://github.com/ossrs/srs/wiki/v2_EN_DeliveryHLS#http-callback
-
- # on_hls_notify, never config in here, should config in http_hooks.
- # we support the variables to generate the notify url:
- # [app], replace with the app.
- # [stream], replace with the stream.
- # [param], replace with the param.
- # [ts_url], replace with the ts url.
- # for the hls http callback, @see http_hooks.on_hls_notify of vhost hooks.callback.srs.com
- # @read https://github.com/ossrs/srs/wiki/v2_CN_DeliveryHLS#on-hls-notify
- # @read https://github.com/ossrs/srs/wiki/v2_EN_DeliveryHLS#on-hls-notify
- }
-}
-# the vhost with hls disabled.
-vhost no-hls.srs.com {
- hls {
- # whether the hls is enabled.
- # if off, do not write hls(ts and m3u8) when publish.
- # default: off
- enabled off;
- }
-}
-
-# the vhost with adobe hds
-vhost hds.srs.com {
- hds {
- # whether hds enabled
- # default: off
- enabled on;
- # the hds fragment in seconds.
- # default: 10
- hds_fragment 10;
- # the hds window in seconds, erase the segment when exceed the window.
- # default: 60
- hds_window 60;
- # the path to store the hds files.
- # default: ./objs/nginx/html
- hds_path ./objs/nginx/html;
- }
-}
-
-# vhost for dvr
-vhost dvr.srs.com {
- # DVR RTMP stream to file,
- # start to record to file when encoder publish,
- # reap flv/mp4 according by specified dvr_plan.
- dvr {
- # whether enabled dvr features
- # default: off
- enabled on;
- # the filter for dvr to apply to.
- # all, dvr all streams of all apps.
- # /, apply to specified stream of app.
- # for example, to dvr the following two streams:
- # live/stream1 live/stream2
- # default: all
- dvr_apply all;
- # the dvr plan. canbe:
- # session reap flv/mp4 when session end(unpublish).
- # segment reap flv/mp4 when flv duration exceed the specified dvr_duration.
- # @remark The plan append is removed in SRS3+, for it's no use.
- # default: session
- dvr_plan session;
- # the dvr output path, *.flv or *.mp4.
- # we supports some variables to generate the filename.
- # [vhost], the vhost of stream.
- # [app], the app of stream.
- # [stream], the stream name of stream.
- # [2006], replace this const to current year.
- # [01], replace this const to current month.
- # [02], replace this const to current date.
- # [15], replace this const to current hour.
- # [04], replace this const to current minute.
- # [05], replace this const to current second.
- # [999], replace this const to current millisecond.
- # [timestamp],replace this const to current UNIX timestamp in ms.
- # @remark we use golang time format "2006-01-02 15:04:05.999" as "[2006]-[01]-[02]_[15].[04].[05]_[999]"
- # for example, for url rtmp://ossrs.net/live/livestream and time 2015-01-03 10:57:30.776
- # 1. No variables, the rule of SRS1.0(auto add [stream].[timestamp].flv as filename):
- # dvr_path ./objs/nginx/html;
- # =>
- # dvr_path ./objs/nginx/html/live/livestream.1420254068776.flv;
- # 2. Use stream and date as dir name, time as filename:
- # dvr_path /data/[vhost]/[app]/[stream]/[2006]/[01]/[02]/[15].[04].[05].[999].flv;
- # =>
- # dvr_path /data/ossrs.net/live/livestream/2015/01/03/10.57.30.776.flv;
- # 3. Use stream and year/month as dir name, date and time as filename:
- # dvr_path /data/[vhost]/[app]/[stream]/[2006]/[01]/[02]-[15].[04].[05].[999].flv;
- # =>
- # dvr_path /data/ossrs.net/live/livestream/2015/01/03-10.57.30.776.flv;
- # 4. Use vhost/app and year/month as dir name, stream/date/time as filename:
- # dvr_path /data/[vhost]/[app]/[2006]/[01]/[stream]-[02]-[15].[04].[05].[999].flv;
- # =>
- # dvr_path /data/ossrs.net/live/2015/01/livestream-03-10.57.30.776.flv;
- # 5. DVR to mp4:
- # dvr_path ./objs/nginx/html/[app]/[stream].[timestamp].mp4;
- # =>
- # dvr_path ./objs/nginx/html/live/livestream.1420254068776.mp4;
- # @see https://github.com/ossrs/srs/wiki/v3_CN_DVR#custom-path
- # @see https://github.com/ossrs/srs/wiki/v3_EN_DVR#custom-path
- # segment,session apply it.
- # default: ./objs/nginx/html/[app]/[stream].[timestamp].flv
- dvr_path ./objs/nginx/html/[app]/[stream].[timestamp].flv;
- # the duration for dvr file, reap if exceed, in seconds.
- # segment apply it.
- # session,append ignore.
- # default: 30
- dvr_duration 30;
- # whether wait keyframe to reap segment,
- # if off, reap segment when duration exceed the dvr_duration,
- # if on, reap segment when duration exceed and got keyframe.
- # segment apply it.
- # session,append ignore.
- # default: on
- dvr_wait_keyframe on;
- # about the stream monotonically increasing:
- # 1. video timestamp is monotonically increasing,
- # 2. audio timestamp is monotonically increasing,
- # 3. video and audio timestamp is interleaved monotonically increasing.
- # it's specified by RTMP specification, @see 3. Byte Order, Alignment, and Time Format
- # however, some encoder cannot provides this feature, please set this to off to ignore time jitter.
- # the time jitter algorithm:
- # 1. full, to ensure stream start at zero, and ensure stream monotonically increasing.
- # 2. zero, only ensure stream start at zero, ignore timestamp jitter.
- # 3. off, disable the time jitter algorithm, like atc.
- # apply for all dvr plan.
- # default: full
- time_jitter full;
-
- # on_dvr, never config in here, should config in http_hooks.
- # for the dvr http callback, @see http_hooks.on_dvr of vhost hooks.callback.srs.com
- # @read https://github.com/ossrs/srs/wiki/v2_CN_DVR#http-callback
- # @read https://github.com/ossrs/srs/wiki/v2_EN_DVR#http-callback
- }
-}
-
-# vhost for ingest
-vhost ingest.srs.com {
- # ingest file/stream/device then push to SRS over RTMP.
- # the name/id used to identify the ingest, must be unique in global.
- # ingest id is used in reload or http api management.
- # @remark vhost can contains multiple ingest
- ingest livestream {
- # whether enabled ingest features
- # default: off
- enabled on;
- # input file/stream/device
- # @remark only support one input.
- input {
- # the type of input.
- # can be file/stream/device, that is,
- # file: ingest file specified by url.
- # stream: ingest stream specified by url.
- # device: not support yet.
- # default: file
- type file;
- # the url of file/stream.
- url ./doc/source.200kbps.768x320.flv;
- }
- # the ffmpeg
- ffmpeg ./objs/ffmpeg/bin/ffmpeg;
- # the transcode engine, @see all.transcode.srs.com
- # @remark, the output is specified following.
- engine {
- # @see enabled of transcode engine.
- # if disabled or vcodec/acodec not specified, use copy.
- # default: off.
- enabled off;
- # output stream. variables:
- # [vhost] current vhost which start the ingest.
- # [port] system RTMP stream port.
- output rtmp://127.0.0.1:[port]/live?vhost=[vhost]/livestream;
- }
- }
-}
-
-# the vhost for ingest with transcode engine.
-vhost transcode.ingest.srs.com {
- ingest livestream {
- enabled on;
- input {
- type file;
- url ./doc/source.200kbps.768x320.flv;
- }
- ffmpeg ./objs/ffmpeg/bin/ffmpeg;
- engine {
- enabled off;
- perfile {
- re;
- rtsp_transport tcp;
- }
- iformat flv;
- vfilter {
- i ./doc/ffmpeg-logo.png;
- filter_complex 'overlay=10:10';
- }
- vcodec libx264;
- vbitrate 1500;
- vfps 25;
- vwidth 768;
- vheight 320;
- vthreads 12;
- vprofile main;
- vpreset medium;
- vparams {
- t 100;
- coder 1;
- b_strategy 2;
- bf 3;
- refs 10;
- }
- acodec libfdk_aac;
- abitrate 70;
- asample_rate 44100;
- achannels 2;
- aparams {
- profile:a aac_low;
- }
- oformat flv;
- output rtmp://127.0.0.1:[port]/[app]?vhost=[vhost]/[stream];
- }
- }
-}
-
-# the main comments for transcode
-vhost example.transcode.srs.com {
- # the streaming transcode configs.
- # @remark vhost can contains multiple transcode
- transcode {
- # whether the transcode enabled.
- # if off, donot transcode.
- # default: off.
- enabled on;
- # the ffmpeg
- ffmpeg ./objs/ffmpeg/bin/ffmpeg;
- # the transcode engine for matched stream.
- # all matched stream will transcoded to the following stream.
- # the transcode set name(ie. hd) is optional and not used.
- # we will build the parameters to fork ffmpeg:
- # ffmpeg
- # -i
- #
- # -vcodec -b:v -r -s x -profile:v -preset
- #
- # -acodec -b:a -ar -ac
- #
- # -f
- # -y