579 lines
22 KiB
C++
579 lines
22 KiB
C++
#include "display/lv_display.h"
|
||
#include "misc/lv_event.h"
|
||
#include "wifi_board.h"
|
||
#include "sensecap_audio_codec.h"
|
||
#include "display/lcd_display.h"
|
||
#include "font_awesome_symbols.h"
|
||
#include "application.h"
|
||
#include "button.h"
|
||
#include "knob.h"
|
||
#include "config.h"
|
||
#include "led/single_led.h"
|
||
#include "iot/thing_manager.h"
|
||
#include "power_save_timer.h"
|
||
|
||
#include <esp_log.h>
|
||
#include "esp_check.h"
|
||
#include <esp_lcd_panel_io.h>
|
||
#include <esp_lcd_panel_ops.h>
|
||
#include <esp_lcd_spd2010.h>
|
||
#include <driver/spi_master.h>
|
||
#include <driver/i2c_master.h>
|
||
#include <driver/spi_common.h>
|
||
#include <wifi_station.h>
|
||
#include <iot_button.h>
|
||
#include <iot_knob.h>
|
||
#include <esp_io_expander_tca95xx_16bit.h>
|
||
#include <esp_sleep.h>
|
||
#include "esp_console.h"
|
||
#include "esp_mac.h"
|
||
#include "nvs_flash.h"
|
||
|
||
#include "assets/lang_config.h"
|
||
|
||
#define TAG "sensecap_watcher"
|
||
|
||
|
||
LV_FONT_DECLARE(font_puhui_30_4);
|
||
LV_FONT_DECLARE(font_awesome_20_4);
|
||
|
||
class CustomLcdDisplay : public SpiLcdDisplay {
|
||
public:
|
||
CustomLcdDisplay(esp_lcd_panel_io_handle_t io_handle,
|
||
esp_lcd_panel_handle_t panel_handle,
|
||
int width,
|
||
int height,
|
||
int offset_x,
|
||
int offset_y,
|
||
bool mirror_x,
|
||
bool mirror_y,
|
||
bool swap_xy)
|
||
: SpiLcdDisplay(io_handle, panel_handle, width, height, offset_x, offset_y, mirror_x, mirror_y, swap_xy,
|
||
{
|
||
.text_font = &font_puhui_30_4,
|
||
.icon_font = &font_awesome_20_4,
|
||
.emoji_font = font_emoji_64_init(),
|
||
}) {
|
||
|
||
DisplayLockGuard lock(this);
|
||
lv_obj_set_size(status_bar_, LV_HOR_RES, fonts_.text_font->line_height * 2 + 10);
|
||
lv_obj_set_style_layout(status_bar_, LV_LAYOUT_NONE, 0);
|
||
lv_obj_set_style_pad_top(status_bar_, 10, 0);
|
||
lv_obj_set_style_pad_bottom(status_bar_, 1, 0);
|
||
|
||
// 针对圆形屏幕调整位置
|
||
// network battery mute //
|
||
// status //
|
||
lv_obj_align(battery_label_, LV_ALIGN_TOP_MID, -2.5*fonts_.icon_font->line_height, 0);
|
||
lv_obj_align(network_label_, LV_ALIGN_TOP_MID, -0.5*fonts_.icon_font->line_height, 0);
|
||
lv_obj_align(mute_label_, LV_ALIGN_TOP_MID, 1.5*fonts_.icon_font->line_height, 0);
|
||
|
||
lv_obj_align(status_label_, LV_ALIGN_BOTTOM_MID, 0, 0);
|
||
lv_obj_set_flex_grow(status_label_, 0);
|
||
lv_obj_set_width(status_label_, LV_HOR_RES * 0.75);
|
||
lv_label_set_long_mode(status_label_, LV_LABEL_LONG_SCROLL_CIRCULAR);
|
||
|
||
lv_obj_align(notification_label_, LV_ALIGN_BOTTOM_MID, 0, 0);
|
||
lv_obj_set_width(notification_label_, LV_HOR_RES * 0.75);
|
||
lv_label_set_long_mode(notification_label_, LV_LABEL_LONG_SCROLL_CIRCULAR);
|
||
|
||
lv_obj_align(low_battery_popup_, LV_ALIGN_BOTTOM_MID, 0, -20);
|
||
lv_obj_set_style_bg_color(low_battery_popup_, lv_color_hex(0xFF0000), 0);
|
||
lv_obj_set_width(low_battery_label_, LV_HOR_RES * 0.75);
|
||
lv_label_set_long_mode(low_battery_label_, LV_LABEL_LONG_SCROLL_CIRCULAR);
|
||
}
|
||
};
|
||
|
||
class SensecapWatcher : public WifiBoard {
|
||
private:
|
||
i2c_master_bus_handle_t i2c_bus_;
|
||
LcdDisplay* display_;
|
||
std::unique_ptr<Knob> knob_;
|
||
esp_io_expander_handle_t io_exp_handle;
|
||
button_handle_t btns;
|
||
PowerSaveTimer* power_save_timer_;
|
||
esp_lcd_panel_io_handle_t panel_io_ = nullptr;
|
||
esp_lcd_panel_handle_t panel_ = nullptr;
|
||
uint32_t long_press_cnt_;
|
||
void InitializePowerSaveTimer() {
|
||
power_save_timer_ = new PowerSaveTimer(-1, 60, 300);
|
||
power_save_timer_->OnEnterSleepMode([this]() {
|
||
ESP_LOGI(TAG, "Enabling sleep mode");
|
||
auto display = GetDisplay();
|
||
display->SetChatMessage("system", "");
|
||
display->SetEmotion("sleepy");
|
||
GetBacklight()->SetBrightness(10);
|
||
});
|
||
power_save_timer_->OnExitSleepMode([this]() {
|
||
auto display = GetDisplay();
|
||
display->SetChatMessage("system", "");
|
||
display->SetEmotion("neutral");
|
||
GetBacklight()->RestoreBrightness();
|
||
});
|
||
power_save_timer_->OnShutdownRequest([this]() {
|
||
ESP_LOGI(TAG, "Shutting down");
|
||
bool is_charging = (IoExpanderGetLevel(BSP_PWR_VBUS_IN_DET) == 0);
|
||
if (is_charging) {
|
||
ESP_LOGI(TAG, "charging");
|
||
GetBacklight()->SetBrightness(0);
|
||
} else {
|
||
IoExpanderSetLevel(BSP_PWR_SYSTEM, 0);
|
||
}
|
||
});
|
||
power_save_timer_->SetEnabled(true);
|
||
}
|
||
|
||
void InitializeI2c() {
|
||
// Initialize I2C peripheral
|
||
i2c_master_bus_config_t i2c_bus_cfg = {
|
||
.i2c_port = (i2c_port_t)0,
|
||
.sda_io_num = BSP_GENERAL_I2C_SDA,
|
||
.scl_io_num = BSP_GENERAL_I2C_SCL,
|
||
.clk_source = I2C_CLK_SRC_DEFAULT,
|
||
.glitch_ignore_cnt = 7,
|
||
.intr_priority = 0,
|
||
.trans_queue_depth = 0,
|
||
.flags = {
|
||
.enable_internal_pullup = 1,
|
||
},
|
||
};
|
||
ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
|
||
|
||
// pulldown for lcd i2c
|
||
const gpio_config_t io_config = {
|
||
.pin_bit_mask = (1ULL << BSP_TOUCH_I2C_SDA) | (1ULL << BSP_TOUCH_I2C_SCL) | (1ULL << BSP_SPI3_HOST_PCLK) | (1ULL << BSP_SPI3_HOST_DATA0) | (1ULL << BSP_SPI3_HOST_DATA1)
|
||
| (1ULL << BSP_SPI3_HOST_DATA2) | (1ULL << BSP_SPI3_HOST_DATA3) | (1ULL << BSP_LCD_SPI_CS) | (1UL << DISPLAY_BACKLIGHT_PIN),
|
||
.mode = GPIO_MODE_OUTPUT,
|
||
.pull_up_en = GPIO_PULLUP_DISABLE,
|
||
.pull_down_en = GPIO_PULLDOWN_DISABLE,
|
||
.intr_type = GPIO_INTR_DISABLE,
|
||
};
|
||
gpio_config(&io_config);
|
||
|
||
gpio_set_level(BSP_TOUCH_I2C_SDA, 0);
|
||
gpio_set_level(BSP_TOUCH_I2C_SCL, 0);
|
||
|
||
gpio_set_level(BSP_LCD_SPI_CS, 0);
|
||
gpio_set_level(DISPLAY_BACKLIGHT_PIN, 0);
|
||
gpio_set_level(BSP_SPI3_HOST_PCLK, 0);
|
||
gpio_set_level(BSP_SPI3_HOST_DATA0, 0);
|
||
gpio_set_level(BSP_SPI3_HOST_DATA1, 0);
|
||
gpio_set_level(BSP_SPI3_HOST_DATA2, 0);
|
||
gpio_set_level(BSP_SPI3_HOST_DATA3, 0);
|
||
|
||
}
|
||
|
||
esp_err_t IoExpanderSetLevel(uint16_t pin_mask, uint8_t level) {
|
||
return esp_io_expander_set_level(io_exp_handle, pin_mask, level);
|
||
}
|
||
|
||
uint8_t IoExpanderGetLevel(uint16_t pin_mask) {
|
||
uint32_t pin_val = 0;
|
||
esp_io_expander_get_level(io_exp_handle, DRV_IO_EXP_INPUT_MASK, &pin_val);
|
||
pin_mask &= DRV_IO_EXP_INPUT_MASK;
|
||
return (uint8_t)((pin_val & pin_mask) ? 1 : 0);
|
||
}
|
||
|
||
void InitializeExpander() {
|
||
esp_err_t ret = ESP_OK;
|
||
esp_io_expander_new_i2c_tca95xx_16bit(i2c_bus_, ESP_IO_EXPANDER_I2C_TCA9555_ADDRESS_001, &io_exp_handle);
|
||
|
||
ret |= esp_io_expander_set_dir(io_exp_handle, DRV_IO_EXP_INPUT_MASK, IO_EXPANDER_INPUT);
|
||
ret |= esp_io_expander_set_dir(io_exp_handle, DRV_IO_EXP_OUTPUT_MASK, IO_EXPANDER_OUTPUT);
|
||
ret |= esp_io_expander_set_level(io_exp_handle, DRV_IO_EXP_OUTPUT_MASK, 0);
|
||
ret |= esp_io_expander_set_level(io_exp_handle, BSP_PWR_SYSTEM, 1);
|
||
vTaskDelay(100 / portTICK_PERIOD_MS);
|
||
ret |= esp_io_expander_set_level(io_exp_handle, BSP_PWR_START_UP, 1);
|
||
vTaskDelay(50 / portTICK_PERIOD_MS);
|
||
|
||
uint32_t pin_val = 0;
|
||
ret |= esp_io_expander_get_level(io_exp_handle, DRV_IO_EXP_INPUT_MASK, &pin_val);
|
||
ESP_LOGI(TAG, "IO expander initialized: %x", DRV_IO_EXP_OUTPUT_MASK | (uint16_t)pin_val);
|
||
|
||
assert(ret == ESP_OK);
|
||
}
|
||
|
||
void OnKnobRotate(bool clockwise) {
|
||
auto codec = GetAudioCodec();
|
||
int current_volume = codec->output_volume();
|
||
int new_volume = current_volume + (clockwise ? -5 : 5);
|
||
|
||
// 确保音量在有效范围内
|
||
if (new_volume > 100) {
|
||
new_volume = 100;
|
||
ESP_LOGW(TAG, "Volume reached maximum limit: %d", new_volume);
|
||
} else if (new_volume < 0) {
|
||
new_volume = 0;
|
||
ESP_LOGW(TAG, "Volume reached minimum limit: %d", new_volume);
|
||
}
|
||
|
||
codec->SetOutputVolume(new_volume);
|
||
ESP_LOGI(TAG, "Volume changed from %d to %d", current_volume, new_volume);
|
||
|
||
// 显示通知前检查实际变化
|
||
if (new_volume != codec->output_volume()) {
|
||
ESP_LOGE(TAG, "Failed to set volume! Expected:%d Actual:%d",
|
||
new_volume, codec->output_volume());
|
||
}
|
||
GetDisplay()->ShowNotification(std::string(Lang::Strings::VOLUME) + ": "+std::to_string(codec->output_volume()));
|
||
power_save_timer_->WakeUp();
|
||
}
|
||
|
||
void InitializeKnob() {
|
||
knob_ = std::make_unique<Knob>(BSP_KNOB_A_PIN, BSP_KNOB_B_PIN);
|
||
knob_->OnRotate([this](bool clockwise) {
|
||
ESP_LOGD(TAG, "Knob rotation detected. Clockwise:%s", clockwise ? "true" : "false");
|
||
OnKnobRotate(clockwise);
|
||
});
|
||
ESP_LOGI(TAG, "Knob initialized with pins A:%d B:%d", BSP_KNOB_A_PIN, BSP_KNOB_B_PIN);
|
||
}
|
||
|
||
void InitializeButton() {
|
||
button_config_t btn_config = {
|
||
.type = BUTTON_TYPE_CUSTOM,
|
||
.long_press_time = 2000,
|
||
.short_press_time = 50,
|
||
.custom_button_config = {
|
||
.active_level = 0,
|
||
.button_custom_init =nullptr,
|
||
.button_custom_get_key_value = [](void *param) -> uint8_t {
|
||
auto self = static_cast<SensecapWatcher*>(param);
|
||
return self->IoExpanderGetLevel(BSP_KNOB_BTN);
|
||
},
|
||
.button_custom_deinit = nullptr,
|
||
.priv = this,
|
||
},
|
||
};
|
||
|
||
// watcher 是通过长按滚轮进行开机的, 需要等待滚轮释放, 否则用户开机松手时可能会误触成单击
|
||
ESP_LOGI(TAG, "waiting for knob button release");
|
||
while(IoExpanderGetLevel(BSP_KNOB_BTN) == 0) {
|
||
vTaskDelay(50 / portTICK_PERIOD_MS);
|
||
}
|
||
|
||
btns = iot_button_create(&btn_config);
|
||
iot_button_register_cb(btns, BUTTON_SINGLE_CLICK, [](void* button_handle, void* usr_data) {
|
||
auto self = static_cast<SensecapWatcher*>(usr_data);
|
||
auto& app = Application::GetInstance();
|
||
if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) {
|
||
self->ResetWifiConfiguration();
|
||
}
|
||
self->power_save_timer_->WakeUp();
|
||
app.ToggleChatState();
|
||
}, this);
|
||
iot_button_register_cb(btns, BUTTON_LONG_PRESS_START, [](void* button_handle, void* usr_data) {
|
||
auto self = static_cast<SensecapWatcher*>(usr_data);
|
||
bool is_charging = (self->IoExpanderGetLevel(BSP_PWR_VBUS_IN_DET) == 0);
|
||
self->long_press_cnt_ = 0;
|
||
if (is_charging) {
|
||
ESP_LOGI(TAG, "charging");
|
||
} else {
|
||
self->IoExpanderSetLevel(BSP_PWR_LCD, 0);
|
||
self->IoExpanderSetLevel(BSP_PWR_SYSTEM, 0);
|
||
}
|
||
}, this);
|
||
|
||
iot_button_register_cb(btns, BUTTON_LONG_PRESS_HOLD, [](void* button_handle, void* usr_data) {
|
||
auto self = static_cast<SensecapWatcher*>(usr_data);
|
||
self->long_press_cnt_++; // 每隔20ms加一
|
||
// 长按10s 恢复出厂设置: 2+0.02*400 = 10
|
||
if (self->long_press_cnt_ > 400) {
|
||
ESP_LOGI(TAG, "Factory reset");
|
||
nvs_flash_erase();
|
||
esp_restart();
|
||
}
|
||
}, this);
|
||
|
||
}
|
||
|
||
void InitializeSpi() {
|
||
ESP_LOGI(TAG, "Initialize QSPI bus");
|
||
|
||
spi_bus_config_t qspi_cfg = {0};
|
||
qspi_cfg.sclk_io_num = BSP_SPI3_HOST_PCLK;
|
||
qspi_cfg.data0_io_num = BSP_SPI3_HOST_DATA0;
|
||
qspi_cfg.data1_io_num = BSP_SPI3_HOST_DATA1;
|
||
qspi_cfg.data2_io_num = BSP_SPI3_HOST_DATA2;
|
||
qspi_cfg.data3_io_num = BSP_SPI3_HOST_DATA3;
|
||
qspi_cfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * DRV_LCD_BITS_PER_PIXEL / 8 / CONFIG_BSP_LCD_SPI_DMA_SIZE_DIV;
|
||
|
||
ESP_ERROR_CHECK(spi_bus_initialize(SPI3_HOST, &qspi_cfg, SPI_DMA_CH_AUTO));
|
||
}
|
||
|
||
void Initializespd2010Display() {
|
||
ESP_LOGI(TAG, "Install panel IO");
|
||
const esp_lcd_panel_io_spi_config_t io_config = {
|
||
.cs_gpio_num = BSP_LCD_SPI_CS,
|
||
.dc_gpio_num = -1,
|
||
.spi_mode = 3,
|
||
.pclk_hz = DRV_LCD_PIXEL_CLK_HZ,
|
||
.trans_queue_depth = 2,
|
||
.lcd_cmd_bits = DRV_LCD_CMD_BITS,
|
||
.lcd_param_bits = DRV_LCD_PARAM_BITS,
|
||
.flags = {
|
||
.quad_mode = true,
|
||
},
|
||
};
|
||
spd2010_vendor_config_t vendor_config = {
|
||
.flags = {
|
||
.use_qspi_interface = 1,
|
||
},
|
||
};
|
||
esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)BSP_LCD_SPI_NUM, &io_config, &panel_io_);
|
||
|
||
ESP_LOGD(TAG, "Install LCD driver");
|
||
const esp_lcd_panel_dev_config_t panel_config = {
|
||
.reset_gpio_num = BSP_LCD_GPIO_RST, // Shared with Touch reset
|
||
.rgb_ele_order = DRV_LCD_RGB_ELEMENT_ORDER,
|
||
.bits_per_pixel = DRV_LCD_BITS_PER_PIXEL,
|
||
.vendor_config = &vendor_config,
|
||
};
|
||
esp_lcd_new_panel_spd2010(panel_io_, &panel_config, &panel_);
|
||
|
||
esp_lcd_panel_reset(panel_);
|
||
esp_lcd_panel_init(panel_);
|
||
esp_lcd_panel_mirror(panel_, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);
|
||
esp_lcd_panel_disp_on_off(panel_, true);
|
||
|
||
display_ = new CustomLcdDisplay(panel_io_, panel_,
|
||
DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY);
|
||
|
||
// 使每次刷新的起始列数索引是4的倍数且列数总数是4的倍数，以满足SPD2010的要求
|
||
lv_display_add_event_cb(lv_display_get_default(), [](lv_event_t *e) {
|
||
lv_area_t *area = (lv_area_t *)lv_event_get_param(e);
|
||
uint16_t x1 = area->x1;
|
||
uint16_t x2 = area->x2;
|
||
// round the start of area down to the nearest 4N number
|
||
area->x1 = (x1 >> 2) << 2;
|
||
// round the end of area up to the nearest 4M+3 number
|
||
area->x2 = ((x2 >> 2) << 2) + 3;
|
||
}, LV_EVENT_INVALIDATE_AREA, NULL);
|
||
|
||
}
|
||
|
||
// 物联网初始化，添加对 AI 可见设备
|
||
void InitializeIot() {
|
||
auto& thing_manager = iot::ThingManager::GetInstance();
|
||
thing_manager.AddThing(iot::CreateThing("Speaker"));
|
||
thing_manager.AddThing(iot::CreateThing("Screen"));
|
||
thing_manager.AddThing(iot::CreateThing("Battery"));
|
||
}
|
||
|
||
uint16_t BatterygetVoltage(void) {
|
||
static bool initialized = false;
|
||
static adc_oneshot_unit_handle_t adc_handle;
|
||
static adc_cali_handle_t cali_handle = NULL;
|
||
if (!initialized) {
|
||
adc_oneshot_unit_init_cfg_t init_config = {
|
||
.unit_id = ADC_UNIT_1,
|
||
};
|
||
adc_oneshot_new_unit(&init_config, &adc_handle);
|
||
|
||
adc_oneshot_chan_cfg_t ch_config = {
|
||
.atten = BSP_BAT_ADC_ATTEN,
|
||
.bitwidth = ADC_BITWIDTH_DEFAULT,
|
||
};
|
||
adc_oneshot_config_channel(adc_handle, BSP_BAT_ADC_CHAN, &ch_config);
|
||
|
||
adc_cali_curve_fitting_config_t cali_config = {
|
||
.unit_id = ADC_UNIT_1,
|
||
.chan = BSP_BAT_ADC_CHAN,
|
||
.atten = BSP_BAT_ADC_ATTEN,
|
||
.bitwidth = ADC_BITWIDTH_DEFAULT,
|
||
};
|
||
if (adc_cali_create_scheme_curve_fitting(&cali_config, &cali_handle) == ESP_OK) {
|
||
initialized = true;
|
||
}
|
||
}
|
||
if (initialized) {
|
||
int raw_value = 0;
|
||
int voltage = 0; // mV
|
||
adc_oneshot_read(adc_handle, BSP_BAT_ADC_CHAN, &raw_value);
|
||
adc_cali_raw_to_voltage(cali_handle, raw_value, &voltage);
|
||
voltage = voltage * 82 / 20;
|
||
// ESP_LOGI(TAG, "voltage: %dmV", voltage);
|
||
return (uint16_t)voltage;
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
uint8_t BatterygetPercent(bool print = false) {
|
||
int voltage = 0;
|
||
for (uint8_t i = 0; i < 10; i++) {
|
||
voltage += BatterygetVoltage();
|
||
}
|
||
voltage /= 10;
|
||
int percent = (-1 * voltage * voltage + 9016 * voltage - 19189000) / 10000;
|
||
percent = (percent > 100) ? 100 : (percent < 0) ? 0 : percent;
|
||
if (print) {
|
||
printf("voltage: %dmV, percentage: %d%%\r\n", voltage, percent);
|
||
}
|
||
return (uint8_t)percent;
|
||
}
|
||
|
||
void InitializeCmd() {
|
||
esp_console_repl_t *repl = NULL;
|
||
esp_console_repl_config_t repl_config = ESP_CONSOLE_REPL_CONFIG_DEFAULT();
|
||
repl_config.max_cmdline_length = 1024;
|
||
repl_config.prompt = "SenseCAP>";
|
||
|
||
const esp_console_cmd_t cmd1 = {
|
||
.command = "reboot",
|
||
.help = "reboot the device",
|
||
.hint = nullptr,
|
||
.func = [](int argc, char** argv) -> int {
|
||
esp_restart();
|
||
return 0;
|
||
},
|
||
.argtable = nullptr
|
||
};
|
||
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd1));
|
||
|
||
const esp_console_cmd_t cmd2 = {
|
||
.command = "shutdown",
|
||
.help = "shutdown the device",
|
||
.hint = nullptr,
|
||
.func = NULL,
|
||
.argtable = NULL,
|
||
.func_w_context = [](void *context,int argc, char** argv) -> int {
|
||
auto self = static_cast<SensecapWatcher*>(context);
|
||
self->GetBacklight()->SetBrightness(0);
|
||
self->IoExpanderSetLevel(BSP_PWR_SYSTEM, 0);
|
||
return 0;
|
||
},
|
||
.context =this
|
||
};
|
||
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd2));
|
||
|
||
const esp_console_cmd_t cmd3 = {
|
||
.command = "battery",
|
||
.help = "get battery percent",
|
||
.hint = NULL,
|
||
.func = NULL,
|
||
.argtable = NULL,
|
||
.func_w_context = [](void *context,int argc, char** argv) -> int {
|
||
auto self = static_cast<SensecapWatcher*>(context);
|
||
self->BatterygetPercent(true);
|
||
return 0;
|
||
},
|
||
.context =this
|
||
};
|
||
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd3));
|
||
|
||
const esp_console_cmd_t cmd4 = {
|
||
.command = "factory_reset",
|
||
.help = "factory reset and reboot the device",
|
||
.hint = NULL,
|
||
.func = NULL,
|
||
.argtable = NULL,
|
||
.func_w_context = [](void *context,int argc, char** argv) -> int {
|
||
auto self = static_cast<SensecapWatcher*>(context);
|
||
nvs_flash_erase();
|
||
esp_restart();
|
||
return 0;
|
||
},
|
||
.context =this
|
||
};
|
||
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd4));
|
||
|
||
const esp_console_cmd_t cmd5 = {
|
||
.command = "read_mac",
|
||
.help = "Read mac address",
|
||
.hint = NULL,
|
||
.func = NULL,
|
||
.argtable = NULL,
|
||
.func_w_context = [](void *context,int argc, char** argv) -> int {
|
||
uint8_t mac[6];
|
||
esp_read_mac(mac, ESP_MAC_WIFI_STA);
|
||
printf("wifi_sta_mac: " MACSTR "\n", MAC2STR(mac));
|
||
esp_read_mac(mac, ESP_MAC_WIFI_SOFTAP);
|
||
printf("wifi_softap_mac: " MACSTR "\n", MAC2STR(mac));
|
||
esp_read_mac(mac, ESP_MAC_BT);
|
||
printf("bt_mac: " MACSTR "\n", MAC2STR(mac));
|
||
return 0;
|
||
},
|
||
.context =this
|
||
};
|
||
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd5));
|
||
|
||
esp_console_dev_uart_config_t hw_config = ESP_CONSOLE_DEV_UART_CONFIG_DEFAULT();
|
||
ESP_ERROR_CHECK(esp_console_new_repl_uart(&hw_config, &repl_config, &repl));
|
||
ESP_ERROR_CHECK(esp_console_start_repl(repl));
|
||
}
|
||
|
||
public:
|
||
SensecapWatcher() {
|
||
ESP_LOGI(TAG, "Initialize Sensecap Watcher");
|
||
InitializePowerSaveTimer();
|
||
InitializeI2c();
|
||
InitializeSpi();
|
||
InitializeExpander();
|
||
InitializeCmd(); //工厂生产测试使用
|
||
InitializeButton();
|
||
InitializeKnob();
|
||
Initializespd2010Display();
|
||
InitializeIot();
|
||
GetBacklight()->RestoreBrightness();
|
||
}
|
||
|
||
virtual AudioCodec* GetAudioCodec() override {
|
||
static SensecapAudioCodec audio_codec(
|
||
i2c_bus_,
|
||
AUDIO_INPUT_SAMPLE_RATE,
|
||
AUDIO_OUTPUT_SAMPLE_RATE,
|
||
AUDIO_I2S_GPIO_MCLK,
|
||
AUDIO_I2S_GPIO_BCLK,
|
||
AUDIO_I2S_GPIO_WS,
|
||
AUDIO_I2S_GPIO_DOUT,
|
||
AUDIO_I2S_GPIO_DIN,
|
||
AUDIO_CODEC_PA_PIN,
|
||
AUDIO_CODEC_ES8311_ADDR,
|
||
AUDIO_CODEC_ES7243E_ADDR,
|
||
AUDIO_INPUT_REFERENCE);
|
||
return &audio_codec;
|
||
}
|
||
|
||
virtual Display* GetDisplay() override {
|
||
return display_;
|
||
}
|
||
|
||
virtual Backlight* GetBacklight() override {
|
||
static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
|
||
return &backlight;
|
||
}
|
||
|
||
// 根据 https://github.com/Seeed-Studio/OSHW-SenseCAP-Watcher/blob/main/Hardware/SenseCAP_Watcher_v1.0_SCH.pdf
|
||
// RGB LED型号为 ws2813 mini, 连接在GPIO 40，供电电压 3.3v, 没有连接 BIN 双信号线
|
||
// 可以直接兼容SingleLED采用的ws2812
|
||
virtual Led* GetLed() override {
|
||
static SingleLed led(BUILTIN_LED_GPIO);
|
||
return &led;
|
||
}
|
||
|
||
virtual void SetPowerSaveMode(bool enabled) override {
|
||
if (!enabled) {
|
||
power_save_timer_->WakeUp();
|
||
}
|
||
WifiBoard::SetPowerSaveMode(enabled);
|
||
}
|
||
|
||
virtual bool GetBatteryLevel(int &level, bool& charging, bool& discharging) override {
|
||
static bool last_discharging = false;
|
||
charging = (IoExpanderGetLevel(BSP_PWR_VBUS_IN_DET) == 0);
|
||
discharging = !charging;
|
||
level = (int)BatterygetPercent(false);
|
||
|
||
if (discharging != last_discharging) {
|
||
power_save_timer_->SetEnabled(discharging);
|
||
last_discharging = discharging;
|
||
}
|
||
if (level <= 1 && discharging) {
|
||
ESP_LOGI(TAG, "Battery level is low, shutting down");
|
||
IoExpanderSetLevel(BSP_PWR_SYSTEM, 0);
|
||
}
|
||
return true;
|
||
}
|
||
};
|
||
|
||
DECLARE_BOARD(SensecapWatcher);
|