468 lines
20 KiB
C++
468 lines
20 KiB
C++
#include "wifi_board.h"
|
||
#include "audio_codecs/no_audio_codec.h"
|
||
#include "display/lcd_display.h"
|
||
#include "system_reset.h"
|
||
#include "application.h"
|
||
#include "button.h"
|
||
#include "config.h"
|
||
#include "iot/thing_manager.h"
|
||
|
||
#include <esp_log.h>
|
||
#include "i2c_device.h"
|
||
#include <driver/i2c_master.h>
|
||
#include <driver/ledc.h>
|
||
#include <wifi_station.h>
|
||
#include <esp_lcd_panel_io.h>
|
||
#include <esp_lcd_panel_ops.h>
|
||
#include <esp_lcd_st77916.h>
|
||
#include <esp_timer.h>
|
||
#include "esp_io_expander_tca9554.h"
|
||
|
||
#define TAG "waveshare_lcd_1_85"
|
||
|
||
#define LCD_OPCODE_WRITE_CMD (0x02ULL)
|
||
#define LCD_OPCODE_READ_CMD (0x0BULL)
|
||
#define LCD_OPCODE_WRITE_COLOR (0x32ULL)
|
||
|
||
LV_FONT_DECLARE(font_puhui_16_4);
|
||
LV_FONT_DECLARE(font_awesome_16_4);
|
||
|
||
static const st77916_lcd_init_cmd_t vendor_specific_init_new[] = {
|
||
{0xF0, (uint8_t []){0x28}, 1, 0},
|
||
{0xF2, (uint8_t []){0x28}, 1, 0},
|
||
{0x73, (uint8_t []){0xF0}, 1, 0},
|
||
{0x7C, (uint8_t []){0xD1}, 1, 0},
|
||
{0x83, (uint8_t []){0xE0}, 1, 0},
|
||
{0x84, (uint8_t []){0x61}, 1, 0},
|
||
{0xF2, (uint8_t []){0x82}, 1, 0},
|
||
{0xF0, (uint8_t []){0x00}, 1, 0},
|
||
{0xF0, (uint8_t []){0x01}, 1, 0},
|
||
{0xF1, (uint8_t []){0x01}, 1, 0},
|
||
{0xB0, (uint8_t []){0x56}, 1, 0},
|
||
{0xB1, (uint8_t []){0x4D}, 1, 0},
|
||
{0xB2, (uint8_t []){0x24}, 1, 0},
|
||
{0xB4, (uint8_t []){0x87}, 1, 0},
|
||
{0xB5, (uint8_t []){0x44}, 1, 0},
|
||
{0xB6, (uint8_t []){0x8B}, 1, 0},
|
||
{0xB7, (uint8_t []){0x40}, 1, 0},
|
||
{0xB8, (uint8_t []){0x86}, 1, 0},
|
||
{0xBA, (uint8_t []){0x00}, 1, 0},
|
||
{0xBB, (uint8_t []){0x08}, 1, 0},
|
||
{0xBC, (uint8_t []){0x08}, 1, 0},
|
||
{0xBD, (uint8_t []){0x00}, 1, 0},
|
||
{0xC0, (uint8_t []){0x80}, 1, 0},
|
||
{0xC1, (uint8_t []){0x10}, 1, 0},
|
||
{0xC2, (uint8_t []){0x37}, 1, 0},
|
||
{0xC3, (uint8_t []){0x80}, 1, 0},
|
||
{0xC4, (uint8_t []){0x10}, 1, 0},
|
||
{0xC5, (uint8_t []){0x37}, 1, 0},
|
||
{0xC6, (uint8_t []){0xA9}, 1, 0},
|
||
{0xC7, (uint8_t []){0x41}, 1, 0},
|
||
{0xC8, (uint8_t []){0x01}, 1, 0},
|
||
{0xC9, (uint8_t []){0xA9}, 1, 0},
|
||
{0xCA, (uint8_t []){0x41}, 1, 0},
|
||
{0xCB, (uint8_t []){0x01}, 1, 0},
|
||
{0xD0, (uint8_t []){0x91}, 1, 0},
|
||
{0xD1, (uint8_t []){0x68}, 1, 0},
|
||
{0xD2, (uint8_t []){0x68}, 1, 0},
|
||
{0xF5, (uint8_t []){0x00, 0xA5}, 2, 0},
|
||
{0xDD, (uint8_t []){0x4F}, 1, 0},
|
||
{0xDE, (uint8_t []){0x4F}, 1, 0},
|
||
{0xF1, (uint8_t []){0x10}, 1, 0},
|
||
{0xF0, (uint8_t []){0x00}, 1, 0},
|
||
{0xF0, (uint8_t []){0x02}, 1, 0},
|
||
{0xE0, (uint8_t []){0xF0, 0x0A, 0x10, 0x09, 0x09, 0x36, 0x35, 0x33, 0x4A, 0x29, 0x15, 0x15, 0x2E, 0x34}, 14, 0},
|
||
{0xE1, (uint8_t []){0xF0, 0x0A, 0x0F, 0x08, 0x08, 0x05, 0x34, 0x33, 0x4A, 0x39, 0x15, 0x15, 0x2D, 0x33}, 14, 0},
|
||
{0xF0, (uint8_t []){0x10}, 1, 0},
|
||
{0xF3, (uint8_t []){0x10}, 1, 0},
|
||
{0xE0, (uint8_t []){0x07}, 1, 0},
|
||
{0xE1, (uint8_t []){0x00}, 1, 0},
|
||
{0xE2, (uint8_t []){0x00}, 1, 0},
|
||
{0xE3, (uint8_t []){0x00}, 1, 0},
|
||
{0xE4, (uint8_t []){0xE0}, 1, 0},
|
||
{0xE5, (uint8_t []){0x06}, 1, 0},
|
||
{0xE6, (uint8_t []){0x21}, 1, 0},
|
||
{0xE7, (uint8_t []){0x01}, 1, 0},
|
||
{0xE8, (uint8_t []){0x05}, 1, 0},
|
||
{0xE9, (uint8_t []){0x02}, 1, 0},
|
||
{0xEA, (uint8_t []){0xDA}, 1, 0},
|
||
{0xEB, (uint8_t []){0x00}, 1, 0},
|
||
{0xEC, (uint8_t []){0x00}, 1, 0},
|
||
{0xED, (uint8_t []){0x0F}, 1, 0},
|
||
{0xEE, (uint8_t []){0x00}, 1, 0},
|
||
{0xEF, (uint8_t []){0x00}, 1, 0},
|
||
{0xF8, (uint8_t []){0x00}, 1, 0},
|
||
{0xF9, (uint8_t []){0x00}, 1, 0},
|
||
{0xFA, (uint8_t []){0x00}, 1, 0},
|
||
{0xFB, (uint8_t []){0x00}, 1, 0},
|
||
{0xFC, (uint8_t []){0x00}, 1, 0},
|
||
{0xFD, (uint8_t []){0x00}, 1, 0},
|
||
{0xFE, (uint8_t []){0x00}, 1, 0},
|
||
{0xFF, (uint8_t []){0x00}, 1, 0},
|
||
{0x60, (uint8_t []){0x40}, 1, 0},
|
||
{0x61, (uint8_t []){0x04}, 1, 0},
|
||
{0x62, (uint8_t []){0x00}, 1, 0},
|
||
{0x63, (uint8_t []){0x42}, 1, 0},
|
||
{0x64, (uint8_t []){0xD9}, 1, 0},
|
||
{0x65, (uint8_t []){0x00}, 1, 0},
|
||
{0x66, (uint8_t []){0x00}, 1, 0},
|
||
{0x67, (uint8_t []){0x00}, 1, 0},
|
||
{0x68, (uint8_t []){0x00}, 1, 0},
|
||
{0x69, (uint8_t []){0x00}, 1, 0},
|
||
{0x6A, (uint8_t []){0x00}, 1, 0},
|
||
{0x6B, (uint8_t []){0x00}, 1, 0},
|
||
{0x70, (uint8_t []){0x40}, 1, 0},
|
||
{0x71, (uint8_t []){0x03}, 1, 0},
|
||
{0x72, (uint8_t []){0x00}, 1, 0},
|
||
{0x73, (uint8_t []){0x42}, 1, 0},
|
||
{0x74, (uint8_t []){0xD8}, 1, 0},
|
||
{0x75, (uint8_t []){0x00}, 1, 0},
|
||
{0x76, (uint8_t []){0x00}, 1, 0},
|
||
{0x77, (uint8_t []){0x00}, 1, 0},
|
||
{0x78, (uint8_t []){0x00}, 1, 0},
|
||
{0x79, (uint8_t []){0x00}, 1, 0},
|
||
{0x7A, (uint8_t []){0x00}, 1, 0},
|
||
{0x7B, (uint8_t []){0x00}, 1, 0},
|
||
{0x80, (uint8_t []){0x48}, 1, 0},
|
||
{0x81, (uint8_t []){0x00}, 1, 0},
|
||
{0x82, (uint8_t []){0x06}, 1, 0},
|
||
{0x83, (uint8_t []){0x02}, 1, 0},
|
||
{0x84, (uint8_t []){0xD6}, 1, 0},
|
||
{0x85, (uint8_t []){0x04}, 1, 0},
|
||
{0x86, (uint8_t []){0x00}, 1, 0},
|
||
{0x87, (uint8_t []){0x00}, 1, 0},
|
||
{0x88, (uint8_t []){0x48}, 1, 0},
|
||
{0x89, (uint8_t []){0x00}, 1, 0},
|
||
{0x8A, (uint8_t []){0x08}, 1, 0},
|
||
{0x8B, (uint8_t []){0x02}, 1, 0},
|
||
{0x8C, (uint8_t []){0xD8}, 1, 0},
|
||
{0x8D, (uint8_t []){0x04}, 1, 0},
|
||
{0x8E, (uint8_t []){0x00}, 1, 0},
|
||
{0x8F, (uint8_t []){0x00}, 1, 0},
|
||
{0x90, (uint8_t []){0x48}, 1, 0},
|
||
{0x91, (uint8_t []){0x00}, 1, 0},
|
||
{0x92, (uint8_t []){0x0A}, 1, 0},
|
||
{0x93, (uint8_t []){0x02}, 1, 0},
|
||
{0x94, (uint8_t []){0xDA}, 1, 0},
|
||
{0x95, (uint8_t []){0x04}, 1, 0},
|
||
{0x96, (uint8_t []){0x00}, 1, 0},
|
||
{0x97, (uint8_t []){0x00}, 1, 0},
|
||
{0x98, (uint8_t []){0x48}, 1, 0},
|
||
{0x99, (uint8_t []){0x00}, 1, 0},
|
||
{0x9A, (uint8_t []){0x0C}, 1, 0},
|
||
{0x9B, (uint8_t []){0x02}, 1, 0},
|
||
{0x9C, (uint8_t []){0xDC}, 1, 0},
|
||
{0x9D, (uint8_t []){0x04}, 1, 0},
|
||
{0x9E, (uint8_t []){0x00}, 1, 0},
|
||
{0x9F, (uint8_t []){0x00}, 1, 0},
|
||
{0xA0, (uint8_t []){0x48}, 1, 0},
|
||
{0xA1, (uint8_t []){0x00}, 1, 0},
|
||
{0xA2, (uint8_t []){0x05}, 1, 0},
|
||
{0xA3, (uint8_t []){0x02}, 1, 0},
|
||
{0xA4, (uint8_t []){0xD5}, 1, 0},
|
||
{0xA5, (uint8_t []){0x04}, 1, 0},
|
||
{0xA6, (uint8_t []){0x00}, 1, 0},
|
||
{0xA7, (uint8_t []){0x00}, 1, 0},
|
||
{0xA8, (uint8_t []){0x48}, 1, 0},
|
||
{0xA9, (uint8_t []){0x00}, 1, 0},
|
||
{0xAA, (uint8_t []){0x07}, 1, 0},
|
||
{0xAB, (uint8_t []){0x02}, 1, 0},
|
||
{0xAC, (uint8_t []){0xD7}, 1, 0},
|
||
{0xAD, (uint8_t []){0x04}, 1, 0},
|
||
{0xAE, (uint8_t []){0x00}, 1, 0},
|
||
{0xAF, (uint8_t []){0x00}, 1, 0},
|
||
{0xB0, (uint8_t []){0x48}, 1, 0},
|
||
{0xB1, (uint8_t []){0x00}, 1, 0},
|
||
{0xB2, (uint8_t []){0x09}, 1, 0},
|
||
{0xB3, (uint8_t []){0x02}, 1, 0},
|
||
{0xB4, (uint8_t []){0xD9}, 1, 0},
|
||
{0xB5, (uint8_t []){0x04}, 1, 0},
|
||
{0xB6, (uint8_t []){0x00}, 1, 0},
|
||
{0xB7, (uint8_t []){0x00}, 1, 0},
|
||
|
||
{0xB8, (uint8_t []){0x48}, 1, 0},
|
||
{0xB9, (uint8_t []){0x00}, 1, 0},
|
||
{0xBA, (uint8_t []){0x0B}, 1, 0},
|
||
{0xBB, (uint8_t []){0x02}, 1, 0},
|
||
{0xBC, (uint8_t []){0xDB}, 1, 0},
|
||
{0xBD, (uint8_t []){0x04}, 1, 0},
|
||
{0xBE, (uint8_t []){0x00}, 1, 0},
|
||
{0xBF, (uint8_t []){0x00}, 1, 0},
|
||
{0xC0, (uint8_t []){0x10}, 1, 0},
|
||
{0xC1, (uint8_t []){0x47}, 1, 0},
|
||
{0xC2, (uint8_t []){0x56}, 1, 0},
|
||
{0xC3, (uint8_t []){0x65}, 1, 0},
|
||
{0xC4, (uint8_t []){0x74}, 1, 0},
|
||
{0xC5, (uint8_t []){0x88}, 1, 0},
|
||
{0xC6, (uint8_t []){0x99}, 1, 0},
|
||
{0xC7, (uint8_t []){0x01}, 1, 0},
|
||
{0xC8, (uint8_t []){0xBB}, 1, 0},
|
||
{0xC9, (uint8_t []){0xAA}, 1, 0},
|
||
{0xD0, (uint8_t []){0x10}, 1, 0},
|
||
{0xD1, (uint8_t []){0x47}, 1, 0},
|
||
{0xD2, (uint8_t []){0x56}, 1, 0},
|
||
{0xD3, (uint8_t []){0x65}, 1, 0},
|
||
{0xD4, (uint8_t []){0x74}, 1, 0},
|
||
{0xD5, (uint8_t []){0x88}, 1, 0},
|
||
{0xD6, (uint8_t []){0x99}, 1, 0},
|
||
{0xD7, (uint8_t []){0x01}, 1, 0},
|
||
{0xD8, (uint8_t []){0xBB}, 1, 0},
|
||
{0xD9, (uint8_t []){0xAA}, 1, 0},
|
||
{0xF3, (uint8_t []){0x01}, 1, 0},
|
||
{0xF0, (uint8_t []){0x00}, 1, 0},
|
||
{0x21, (uint8_t []){0x00}, 1, 0},
|
||
{0x11, (uint8_t []){0x00}, 1, 120},
|
||
{0x29, (uint8_t []){0x00}, 1, 0},
|
||
};
|
||
class CustomBoard : public WifiBoard {
|
||
private:
|
||
i2c_master_bus_handle_t i2c_bus_;
|
||
esp_io_expander_handle_t io_expander = NULL;
|
||
LcdDisplay* display_;
|
||
button_handle_t boot_btn, pwr_btn;
|
||
|
||
void InitializeI2c() {
|
||
// Initialize I2C peripheral
|
||
i2c_master_bus_config_t i2c_bus_cfg = {
|
||
.i2c_port = (i2c_port_t)0,
|
||
.sda_io_num = I2C_SDA_IO,
|
||
.scl_io_num = I2C_SCL_IO,
|
||
.clk_source = I2C_CLK_SRC_DEFAULT,
|
||
};
|
||
ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
|
||
}
|
||
|
||
void InitializeTca9554(void) {
|
||
esp_err_t ret = esp_io_expander_new_i2c_tca9554(i2c_bus_, I2C_ADDRESS, &io_expander);
|
||
if(ret != ESP_OK)
|
||
ESP_LOGE(TAG, "TCA9554 create returned error");
|
||
|
||
// uint32_t input_level_mask = 0;
|
||
// ret = esp_io_expander_set_dir(io_expander, IO_EXPANDER_PIN_NUM_0 | IO_EXPANDER_PIN_NUM_1, IO_EXPANDER_INPUT); // 设置引脚 EXIO0 和 EXIO1 模式为输入
|
||
// ret = esp_io_expander_get_level(io_expander, IO_EXPANDER_PIN_NUM_0 | IO_EXPANDER_PIN_NUM_1, &input_level_mask); // 获取引脚 EXIO0 和 EXIO1 的电平状态,存放在 input_level_mask 中
|
||
|
||
// ret = esp_io_expander_set_dir(io_expander, IO_EXPANDER_PIN_NUM_2 | IO_EXPANDER_PIN_NUM_3, IO_EXPANDER_OUTPUT); // 设置引脚 EXIO2 和 EXIO3 模式为输出
|
||
// ret = esp_io_expander_set_level(io_expander, IO_EXPANDER_PIN_NUM_2 | IO_EXPANDER_PIN_NUM_3, 1); // 将引脚电平设置为 1
|
||
// ret = esp_io_expander_print_state(io_expander); // 打印引脚状态
|
||
|
||
ret = esp_io_expander_set_dir(io_expander, IO_EXPANDER_PIN_NUM_0 | IO_EXPANDER_PIN_NUM_1, IO_EXPANDER_OUTPUT); // 设置引脚 EXIO0 和 EXIO1 模式为输出
|
||
ESP_ERROR_CHECK(ret);
|
||
ret = esp_io_expander_set_level(io_expander, IO_EXPANDER_PIN_NUM_0 | IO_EXPANDER_PIN_NUM_1, 1); // 复位 LCD 与 TouchPad
|
||
ESP_ERROR_CHECK(ret);
|
||
vTaskDelay(pdMS_TO_TICKS(300));
|
||
ret = esp_io_expander_set_level(io_expander, IO_EXPANDER_PIN_NUM_0 | IO_EXPANDER_PIN_NUM_1, 0); // 复位 LCD 与 TouchPad
|
||
ESP_ERROR_CHECK(ret);
|
||
vTaskDelay(pdMS_TO_TICKS(300));
|
||
ret = esp_io_expander_set_level(io_expander, IO_EXPANDER_PIN_NUM_0 | IO_EXPANDER_PIN_NUM_1, 1); // 复位 LCD 与 TouchPad
|
||
ESP_ERROR_CHECK(ret);
|
||
}
|
||
|
||
void InitializeSpi() {
|
||
ESP_LOGI(TAG, "Initialize QSPI bus");
|
||
|
||
const spi_bus_config_t bus_config = TAIJIPI_ST77916_PANEL_BUS_QSPI_CONFIG(QSPI_PIN_NUM_LCD_PCLK,
|
||
QSPI_PIN_NUM_LCD_DATA0,
|
||
QSPI_PIN_NUM_LCD_DATA1,
|
||
QSPI_PIN_NUM_LCD_DATA2,
|
||
QSPI_PIN_NUM_LCD_DATA3,
|
||
QSPI_LCD_H_RES * 80 * sizeof(uint16_t));
|
||
ESP_ERROR_CHECK(spi_bus_initialize(QSPI_LCD_HOST, &bus_config, SPI_DMA_CH_AUTO));
|
||
}
|
||
|
||
void Initializest77916Display() {
|
||
|
||
esp_lcd_panel_io_handle_t panel_io = nullptr;
|
||
esp_lcd_panel_handle_t panel = nullptr;
|
||
|
||
ESP_LOGI(TAG, "Install panel IO");
|
||
|
||
esp_lcd_panel_io_spi_config_t io_config = {
|
||
.cs_gpio_num = QSPI_PIN_NUM_LCD_CS,
|
||
.dc_gpio_num = -1,
|
||
.spi_mode = 0,
|
||
.pclk_hz = 3 * 1000 * 1000,
|
||
.trans_queue_depth = 10,
|
||
.on_color_trans_done = NULL,
|
||
.user_ctx = NULL,
|
||
.lcd_cmd_bits = 32,
|
||
.lcd_param_bits = 8,
|
||
.flags = {
|
||
.dc_low_on_data = 0,
|
||
.octal_mode = 0,
|
||
.quad_mode = 1,
|
||
.sio_mode = 0,
|
||
.lsb_first = 0,
|
||
.cs_high_active = 0,
|
||
},
|
||
};
|
||
ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)QSPI_LCD_HOST, &io_config, &panel_io));
|
||
|
||
ESP_LOGI(TAG, "Install ST77916 panel driver");
|
||
|
||
st77916_vendor_config_t vendor_config = {
|
||
.flags = {
|
||
.use_qspi_interface = 1,
|
||
},
|
||
};
|
||
|
||
printf("-------------------------------------- Version selection -------------------------------------- \r\n");
|
||
esp_err_t ret;
|
||
int lcd_cmd = 0x04;
|
||
uint8_t register_data[4];
|
||
size_t param_size = sizeof(register_data);
|
||
lcd_cmd &= 0xff;
|
||
lcd_cmd <<= 8;
|
||
lcd_cmd |= LCD_OPCODE_READ_CMD << 24; // Use the read opcode instead of write
|
||
ret = esp_lcd_panel_io_rx_param(panel_io, lcd_cmd, register_data, param_size);
|
||
if (ret == ESP_OK) {
|
||
printf("Register 0x04 data: %02x %02x %02x %02x\n", register_data[0], register_data[1], register_data[2], register_data[3]);
|
||
} else {
|
||
printf("Failed to read register 0x04, error code: %d\n", ret);
|
||
}
|
||
// panel_io_spi_del(io_handle);
|
||
io_config.pclk_hz = 80 * 1000 * 1000;
|
||
if (esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)QSPI_LCD_HOST, &io_config, &panel_io) != ESP_OK){
|
||
printf("Failed to set LCD communication parameters -- SPI\r\n");
|
||
return ;
|
||
}
|
||
printf("LCD communication parameters are set successfully -- SPI\r\n");
|
||
|
||
// Check register values and configure accordingly
|
||
if (register_data[0] == 0x00 && register_data[1] == 0x7F && register_data[2] == 0x7F && register_data[3] == 0x7F) {
|
||
// Handle the case where the register data matches this pattern
|
||
printf("Vendor-specific initialization for case 1.\n");
|
||
}
|
||
else if (register_data[0] == 0x00 && register_data[1] == 0x02 && register_data[2] == 0x7F && register_data[3] == 0x7F) {
|
||
// Provide vendor-specific initialization commands if register data matches this pattern
|
||
vendor_config.init_cmds = vendor_specific_init_new;
|
||
vendor_config.init_cmds_size = sizeof(vendor_specific_init_new) / sizeof(st77916_lcd_init_cmd_t);
|
||
printf("Vendor-specific initialization for case 2.\n");
|
||
}
|
||
printf("------------------------------------- End of version selection------------------------------------- \r\n");
|
||
|
||
const esp_lcd_panel_dev_config_t panel_config = {
|
||
.reset_gpio_num = QSPI_PIN_NUM_LCD_RST,
|
||
.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB, // Implemented by LCD command `36h`
|
||
.bits_per_pixel = QSPI_LCD_BIT_PER_PIXEL, // Implemented by LCD command `3Ah` (16/18)
|
||
.vendor_config = &vendor_config,
|
||
};
|
||
ESP_ERROR_CHECK(esp_lcd_new_panel_st77916(panel_io, &panel_config, &panel));
|
||
|
||
esp_lcd_panel_reset(panel);
|
||
esp_lcd_panel_init(panel);
|
||
esp_lcd_panel_disp_on_off(panel, true);
|
||
esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY);
|
||
esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);
|
||
|
||
display_ = new SpiLcdDisplay(panel_io, panel,
|
||
DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY,
|
||
{
|
||
.text_font = &font_puhui_16_4,
|
||
.icon_font = &font_awesome_16_4,
|
||
.emoji_font = font_emoji_64_init(),
|
||
});
|
||
}
|
||
|
||
void InitializeButtonsCustom() {
|
||
gpio_reset_pin(BOOT_BUTTON_GPIO);
|
||
gpio_set_direction(BOOT_BUTTON_GPIO, GPIO_MODE_INPUT);
|
||
gpio_reset_pin(PWR_BUTTON_GPIO);
|
||
gpio_set_direction(PWR_BUTTON_GPIO, GPIO_MODE_INPUT);
|
||
gpio_reset_pin(PWR_Control_PIN);
|
||
gpio_set_direction(PWR_Control_PIN, GPIO_MODE_OUTPUT);
|
||
// gpio_set_level(PWR_Control_PIN, false);
|
||
gpio_set_level(PWR_Control_PIN, true);
|
||
}
|
||
void InitializeButtons() {
|
||
InitializeButtonsCustom();
|
||
button_config_t btns_config = {
|
||
.type = BUTTON_TYPE_CUSTOM,
|
||
.long_press_time = 2000,
|
||
.short_press_time = 50,
|
||
.custom_button_config = {
|
||
.active_level = 0,
|
||
.button_custom_init = nullptr,
|
||
.button_custom_get_key_value = [](void *param) -> uint8_t {
|
||
return gpio_get_level(BOOT_BUTTON_GPIO);
|
||
},
|
||
.button_custom_deinit = nullptr,
|
||
.priv = this,
|
||
},
|
||
};
|
||
boot_btn = iot_button_create(&btns_config);
|
||
iot_button_register_cb(boot_btn, BUTTON_SINGLE_CLICK, [](void* button_handle, void* usr_data) {
|
||
auto self = static_cast<CustomBoard*>(usr_data);
|
||
auto& app = Application::GetInstance();
|
||
if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) {
|
||
self->ResetWifiConfiguration();
|
||
}
|
||
app.ToggleChatState();
|
||
}, this);
|
||
iot_button_register_cb(boot_btn, BUTTON_LONG_PRESS_START, [](void* button_handle, void* usr_data) {
|
||
// 长按无处理
|
||
}, this);
|
||
|
||
btns_config.long_press_time = 5000;
|
||
btns_config.custom_button_config.button_custom_get_key_value = [](void *param) -> uint8_t {
|
||
return gpio_get_level(PWR_BUTTON_GPIO);
|
||
};
|
||
pwr_btn = iot_button_create(&btns_config);
|
||
iot_button_register_cb(pwr_btn, BUTTON_SINGLE_CLICK, [](void* button_handle, void* usr_data) {
|
||
// auto self = static_cast<CustomBoard*>(usr_data); // 以下程序实现供用户参考 ，实现单击pwr按键调整亮度
|
||
// if(self->GetBacklight()->brightness() > 1) // 如果亮度不为0
|
||
// self->GetBacklight()->SetBrightness(1); // 设置亮度为1
|
||
// else
|
||
// self->GetBacklight()->RestoreBrightness(); // 恢复原本亮度
|
||
// 短按无处理
|
||
}, this);
|
||
iot_button_register_cb(pwr_btn, BUTTON_LONG_PRESS_START, [](void* button_handle, void* usr_data) {
|
||
auto self = static_cast<CustomBoard*>(usr_data);
|
||
if(self->GetBacklight()->brightness() > 0) {
|
||
self->GetBacklight()->SetBrightness(0);
|
||
gpio_set_level(PWR_Control_PIN, false);
|
||
}
|
||
else {
|
||
self->GetBacklight()->RestoreBrightness();
|
||
gpio_set_level(PWR_Control_PIN, true);
|
||
}
|
||
}, this);
|
||
}
|
||
|
||
|
||
// 物联网初始化，添加对 AI 可见设备
|
||
void InitializeIot() {
|
||
auto& thing_manager = iot::ThingManager::GetInstance();
|
||
thing_manager.AddThing(iot::CreateThing("Speaker"));
|
||
thing_manager.AddThing(iot::CreateThing("Screen"));
|
||
}
|
||
|
||
public:
|
||
CustomBoard() {
|
||
InitializeI2c();
|
||
InitializeTca9554();
|
||
InitializeSpi();
|
||
Initializest77916Display();
|
||
InitializeButtons();
|
||
InitializeIot();
|
||
GetBacklight()->RestoreBrightness();
|
||
}
|
||
|
||
virtual AudioCodec* GetAudioCodec() override {
|
||
static NoAudioCodecSimplex audio_codec(AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
|
||
AUDIO_I2S_SPK_GPIO_BCLK, AUDIO_I2S_SPK_GPIO_LRCK, AUDIO_I2S_SPK_GPIO_DOUT, I2S_STD_SLOT_BOTH, AUDIO_I2S_MIC_GPIO_SCK, AUDIO_I2S_MIC_GPIO_WS, AUDIO_I2S_MIC_GPIO_DIN, I2S_STD_SLOT_RIGHT); // I2S_STD_SLOT_LEFT / I2S_STD_SLOT_RIGHT / I2S_STD_SLOT_BOTH
|
||
|
||
return &audio_codec;
|
||
}
|
||
|
||
virtual Display* GetDisplay() override {
|
||
return display_;
|
||
}
|
||
|
||
virtual Backlight* GetBacklight() override {
|
||
static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
|
||
return &backlight;
|
||
}
|
||
};
|
||
|
||
DECLARE_BOARD(CustomBoard);
|